• 热门标签

当前位置: 主页 > 航空资料 > 飞行资料 >

时间:2010-11-03 23:06来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

number is provided to the firing element.
4-179. ARTILLERY FIRE REQUESTS.
There are three types of artillery fire requests 
preplanned, new, and Copperhead.
4-180. PREPLANNED FIRE REQUESTS.
To insert a preplanned fire request, proceed as
follows:
1. IDM switch  Press as required to display
IDM Index page.
2. ARTY REQ key  Press.
3. On line opposite mission to be replaced.
NEW key  Press.
4. REQ PPLN key  Press.
5. Mission type  Select either FPF or CPHD
as desired.
NOTE
PULL
MAN
PULL
BKUP
BRT
C
ONT
VSD HSD MMS COMM
PULL
MAN
PULL
BKUP
BRT
C
ONT
HSD MMS COMM
PULL
MAN
PULL
BKUP
BRT
C
ONT
VSD HSD MMS COMM
RAPID
RAPID
AIR MISSION ROUNDS ENTRY PAGE
ROUNDS - #
N/G
RQST
RQSTD
XMT?
1SGL LOA/D
N/G-TGT
105SFQ12345678
SEND
AIR MISSION SUMMARY
AIR MISSION SUMMARY PAGE
XMT
FIRE CONTROL
TGT TYPE
OWN RNG/BRG
TO TGT
SEND
DESTINATION TGT NO/TYPE
ACFT/
TGT
ANGLE
MISSION CMD
MISSION STATUS
SEPARATION ANGLE
OR TIME ON TGT
RAPID
VSD
DEST - ?? ??:1
406530-47-3
J2997
Figure 4-95. Air Mission Summary Pages If KNPT TGT is selected, entry of two-digit
KNPT number is required.
4-197
TM 1-1520-248-10
6. KNPT TGT or NEW TGT  Select as 4. To accomplish in active mission, M1 or M2
appropriate. key  Press as desired.
7. ARTY Mission Summary page will appear  5. CPHD  Press.
Press SEND. Wait for preplanned MTO then
continue. NOTE
8. IDM switch  Press to return to IDM Index If KNPT TGT is selected, entry of two-digit
page. KNPT number is required.
9. ARTY REQ key  Press. 6. NEW TGT or KNPT TGT  Select as
10. PPLN LIST key  Press. appropriate.
11. P1 or P2  Press NEW as desired. 7. ARRevTiYe wM iAsRsiTonY SMuimssmioanry Spuamgem awriyll appapgeea rand
12. L-2  Press on Preplan Insertion pages. change as required.
13. Repeat steps 1 through 12 to insert a second 8. SEND key  Press (fig. 4-98).
preplanned mission.
4 - 1 8 3 . M O V E M E N T C O M M A N D NOTE COMMUNICATIONS.
If the PPLN mission is requested as M1, it The Movement pages allow position instructions to be
can only be stored as P1. transmitted without voice communication. The IDM
operator can issue directions to specific or all team
4-181. NEW ARTILLERY FIRE MISSION members to MOVE TO, HOLD AT, rendezvous (RDZV)
REQUEST. at; or inform team members MOVING TO or HLDG AT
a location. The locations can be preset to allow rapid
To initiate a new fire mission, proceed as follows: communication. In addition, the Movement pages allow
1. Target locate steps  Accomplish as automatic transmission of current position through MY
required. POSITION key and free text communication through
the OTHER key.
2. IDM switch  Press as required to display
IDM Index page. 4 - 1 8 4 . M O V E M E N T C O M M A N D
3. ARTY REQ key  Press. TRANSMISSION.
4. NEW key opposite mission (M1 or M2) to be Transmit movement commands as follows (fig. 4-99):
replaced  Press. 1. IDM switch  Press as required to display
5. Mission type  Press applicable key and IDM Index page.
enter required parameters on subsequent 2. MOVEMENT key  Press.
pages until all data is inserted.
3. Appropriate movement type key  Press.
6. Review mission on Summary page and make
changes as required. 4. Appropriate destination select key  Press.
7. SEND key  Press. NOTE
NOTE Pressing OTHER key will display Freetext
Message Entry page where a manual entry
• New Artillery Fire Mission Request can be made using MFK.
(simplified) is depicted in fig. 4-96.
5. Mission Summary page  Review and • A generic Artillery Mission Summary page change as required.
is shown in fig. 4-97.
6. SEND key  Press (fig. 4-99).
4-182. COPPERHEAD FIRE MISSION 
ACTIVE AND PREPLANNED. 4-185. REPORT COMMUNICATIONS.
To accomplish a Copperhead fire mission, proceed as The Report pages (fig. 4-100) allow the observer to
follows (fig. 4-98). provide various information to team and net members
such as: Situation/status (SIT/STATUS) which reports
1. Target locate steps  Accomplish. the observers own situation, SPOT which reports target
2. IDM switch  Press as required to display activity, ATI to provide intelligence reports to artillery
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(22)