曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
pertains to the Call For Fire Message into Valid entry is 0 to 14.
either the ARTY #1 or ARTY #2 (in that
order) database. b. Line 3. This line is hard text and reads
CMDR ASMT.
g. SPOT QTY. Select one of the seven fixed
options or manually enter the quantity (fig. c. Line 4. Select to display the Commander
4-107). Normally, the fixed entries are Assessment (CMDR ASMT) overlay. The
determined by the data provided by the option selected on the SPOT CMDR ASMT
message defaults loaded from the DTS at overlay is displayed on this line.
i n i t i a l i z a t i o n . I f the DTS data i s not
a v a i l a b l e , t h e d e f a u l t s a r e : MAN d. Line 5. This line is hard text and reads OPS.
ENTRY=(1), 1=(0), 3=(1), 5=(2), 10=(3),
25=(4), 50=(5), and 100=(6). Selection of e. Line 6. Select this option to display the
the MAN ENTRY option activates the MFK Nature of Operation (OPS) overlay. The
data entry allowing the CPG to enter up to option selected on the SPOT OPS overlay is
three numbers. displayed on this line.
h. SPOT TYPE. The target TYPE that is to be f. SEND. Select this option to i n i t i a t e
sent with the SPOT report is provided using transmission of the message.
this overlay (fig. 4-107). The default entries
list on the overlay when no DTS input is g. SITREP CMDR ASMT. This page (fig. 4-
available is: FIXED WING=(4), HELO=(3), 107) provides four options that can be used
ASSY=(2), PRSNL=(1), ARMOR=(0), to update the SITREP message. Selection
4-226
TM 1-1520-248-10
of an option transitions the display back to text displayed on line 2 of the previous
the SPOT overlay. FREE TXT message. Upon entry to this
page, the MFK entry mode is activated.
h. SITREP OPS. The Nature of Operations Select SEND to go to the SEND
page (fig. 4-107) provides seven options overlay.
that can be used to update the SITREP
message. Selection of an option transitions b. FREE TXT MAN ENTRY. This overlay
the display back to the SITREP overlay. If allows a free text message of up to 112
the DTS does not contain a valid options characters to be prepared and SENT. Upon
list, the default entries are: BACK=(4), entry to this overlay, the MFK entry mode is
ATTACK=(3), DEFEND=(2), SCREEN=(1), activated. Selection of the cursor allows
N/G=(0), MOVE to CONTACT=(1), ZONE entry of the keyboard data. Select SEND to
RECON=(2), AREA RECON=(3), and go to the SEND overlay.
ROUTE RECON=(4).
c. COMMO CHECK. Selection of this option
5. FREE TXT. Select FREE TXT (fig. 4-107) to i n i t i a t e s a FREE TXT message with
display the following five options: MOVE TO, COMMO CHECK. There is no overlay
HOLD AT, RDZV AT, MOVING TO, and associated with this option. The message is
HOLDING AT. Also provided is a manual automatically generated and the display
FREE TXT entry overlay and an option to transitions to the SEND overlay.
initiate communication check (COMMO
CHECK). 6. INFO RQST. Select INFO RQST to request
SITREP and POSREP information.
a. FREE TXT (Specific). This overlay (fig. 4-
107) provides a capability to send a free text a. SITREP. Select SITREP to generate a
message describing what needs to be done s i t u a t i o n r e p o r t . T h e T A C I D s a r e
with respect to a given waypoint. This page automatically entered and the display
contains the following options and data. transitions to the SEND overlay.
(1) Line 2. − Contains text that indicates
which option was selected from the b. POSREP. Select POSREP to generate a
FREE TXT overlay. For example, if the p o s i t i o n r e p o r t . T h e T A C I D s a r e
MOVE TO option was selected, this line automatically entered and the display
would read MOVE TO. transitions to the SEND overlay.
(2) Line 3. − Identifies the selected
w a y p o i n t i d e n t i f i e r and i t s UTM 4-215. FIRE MISSIONS THREAD.
coordinates.
(3) CHANGE WPT. − Select this option to Select FIRE MSNS from the START menu to display
display the NXT WPT overlay. FIRE MSNS thread (fig. 4-108). The fire missions
(4) MAN ENTRY. − Select this option to thread provides the operator with the capability to
display the MAN TXT manual entry select the type of fire mission, configure the fire
display. mission, and access the JVMF Mission Summary
(5) SEND. − Select this option to initiate the Pages.
transmission of the message.
(6) NXT WPT. − This page (fig. 4-107) 1. FIRE MSNS. This overlay ( f i g . 4-108)
provides the capability to change the provides the capability to select and view the
waypoint to which this message refers. active fire mission threads if the mission has
When this overlay is displayed, the MFK not been activated. If an activated fire
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(32)
