曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
priority for the currently selected fire ARTY #N overlay.
mission. Selection of an option from this (8) Waypoint Entry. − This overlay provides
overlay replaces the ARTY CONTROL the capability to change the target by
overlay with the previously displayed ARTY entering a waypoint identifier. Upon
#N overlay and changes line 2 to reflect the entry to this page the MFK entry mode
option selected on the ARTY CONTROL
is activated and a cursor is displayed so
pop-up.
that data can be entered. Completion of
a valid entry (pressing MFK ENTER
c. ARTY TGT LOC. This overlay (fig. 4-108) is key) accepts the data and changes the
used to change the target as well as select HOG display to the previously displayed
the method by which the new target is ARTY #N overlay.
identified. (9) Manual Known Point Entry. − This
(1) Line 1. − Select this option to display overlay provides the capability to
the TGT Number Manual Target Entry
change the target by entering a known
pop-up.
point. A valid entry consists of a number
(2) Line 2. − This option transitions the
display to the TGT LOC Manual Grid in the range 0-99. Upon entry to this
Entry overlay. page the MFK entry mode is activated
(3) Line 3. − This option provides the and a cursor is displayed so that data
capability to select a target using its can be entered. Completion of a valid
waypoint identifier. This capability is entry (pressing MFK ENTER key)
provided by displaying the TGT LOC accepts the data and changes the HOG
Waypoint Entry overlay. display to the previously displayed
(4) Line 4. − This option transitions the ARTY #N overlay.
display to the TGT LOC Manual Known (10) Manual Known Point W/Shift. − This
Point Entry pop-up display. overlay provides the capability to
(5) Line 5. − This option transitions the change the target by entering a known
display to the TGT LOC Manual Known point with a shift entry. Upon entry to
Point W/Shift Entry pop-up display. t h i s page the MFK entry mode i s
(6) Manual Target Entry. − This overlay activated and a cursor is displayed so
provides the capability to change the that data can be entered. A valid entry
target by manually entering a target for the known point is a number in the
number. A valid entry consists of the range 0-99.
4-235
TM 1-1520-248-10
(a) Completion of a valid known point capability to either choose one of four
entry (pressing MFK ENTER key) Remote HELLFIRE (RHF) missions or to
accepts the data and moves the select Target Handoff mode. Selection of any
cursor to the right of the text U/D of the options transitions the display to the
allowing the operator to enter a valid AIR #N overlay (N = 1 or 2 for mission 1 or
vertical shift (a number in the range mission 2 and was selected from the previous
±9999); menu).
(b) The cursor then advances to the next
line and is positioned to the right of a. AIR #N. This overlay (fig. 4-108) provides
the text L/R, allowing the operator to the interface that allows the operator to
enter a valid lateral shift (a number in select type, quantity, location, and activity
the range ±4095); for a given target.
(1) Line 2. − Indicates the RHF Mission
(c) The cursor then advances to the next I n d i c a t o r (RHF) and Lock Mode
line and is positioned to the right of Designator or Target Handoff. Select
the text A/D, allowing the operator to this option to transition the display to
enter a valid range shift (a number in the AIR CONTROL overlay.
the range ±4095). (2) Line 3. − Contains the prepoint bearing,
prepoint range, and last target identifier.
Select this option to transition the
(d) After the required data is entered the
display to the AIR TGT LOC overlay.
CPG must press the Point Track
(3) Line 4. − Displays the target quantity
switch to accept the data and change
and generic type. Select this option to
t h e HOG d i s p l a y back t o t h e
previously displayed ARTY #N transition the display to the AIR TGT
overlay. LOC overlay.
(4) Line 5. − Indicates target activity and
course. Select this option to transition
d. ARTY TGT QTY. Enter target quantity the display to the AIR TGT ACTIVITY
manually or select one of the available overlay.
options (fig. 4-108). (5) Line 6. − Select this option to transition
the display to the MODE overlay. This is
e. ARTY TGT TYPE. Select a target type from not a valid option for the Target Handoff
the available options to transition the display mode.
back to the ARTY #N overlay. The options (6) SEND. − Initiates the transmission of
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPTER 2(34)
