曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
navigation coordinate system is Lat/Long.
9. POS/LAT key Allows for the display/entry of the position information (either the full UTM
position or latitude). The current SLEW position/SLEW latitude is displayed
below the legend.
Figure 3-49. RMS Page, SLEW Mode (Sheet 2 of 2)
3-96
TM 1-1520-248-10
PULL
MAN
PULL
BKUP
BRT
C
ONT
VSD COMM
2
1
3
4
6
7
5
FPLN
RMS
8 FPLN
FEATURE
SELECT
TARGETS
WAYPOINTS
MMS
BFLD
GRAPHICS
ELEV
BND
550
DATAFRAME
100
406075-1496-4
J3062
CONTROL/INDICATOR FUNCTION
1. WAYPOINTS key Determines whether the waypoints are included as part of the overlay
displayed on the RMS page.
2. TARGETS key Determines whether the targets are included as part of the overlay displayed
on the RMS page.
3. DATAFRAME key Allows for display/entry of the Data Frame that is used when DATAFRAME
is selected on the RMS page. The current value is displayed in a boxed area
below DATAFRAME legend. The valid entry range is 1 to 100 inclusive.
4. RMS key Calls up the RMS page.
5. ELEV BND key Allows for the display/entry of the elevation bands value that is used when
ELEV BND is enabled on the RMS page. The current value is displayed in a
boxed area below the ELEV BND legend. The valid range is 1 to 99999.
Figure 3-50. RMS Setup Page (Sheet 1 of 2)
3-97
TM 1-1520-248-10
(Cont)
CONTROL/INDICATOR FUNCTION
6. FEATURE SELECT key Calls up the RMS feature selection page.
7. BFLD GRAPHICS key Determines whether the battlefield graphics (BFLD GRAPHICS) are included
as part of the overlays displayed on the RMS page.
8. FPLN key Determines whether the flight plan (FPLN) stick map is included as part of
the overlays display on the RMS page. Depending upon the selected scale
and zoom factors when FPLN stick map is displayed, the associated
waypoint numbers may be truncated to just a numerical display, or truncated
in their entirety. If the DIR WPT mode is activated while the flight plan is
one of the selected options, the flight plan stick map is removed and the DIR
WPT mode is displayed in its place. When the DIR WPT mode is
deactivated, the flight plan overlay is returned to its previous state.
Figure 3-50. RMS Setup Page (Sheet 2 of 2)
3-98
TM 1-1520-248-10
PULL
MAN
PULL
BKUP
BRT
C
ONT
VSD COMM
2
1
FPLN
RMS
406075-1496-5
J0523
SETUP
MMS
SELECT
ON/OFF
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ROAD
RIVER
RAILROAD
POWERLINE
SHORE & LAKE
AIRPORT
PIPELINE
TOWNS
TOWER
MINE &QUARRY
NAVAID
GRID
POLITICAL BOUND
AIRSPACE BOUND
OFFSHOR PLATFRM
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3
4
5 *
CONTROL/INDICATOR FUNCTION
1. SETUP key Calls up the RMS SETUP Page.
2. RMS key Calls up the RMS Page.
3. SELECT key Selects the currently boxed feature on the Feature List for display when
overlay is active on the RMS Page, or deselects the boxed feature for
display. Those features in the list that have an asterisk to the left of the
feature text are included for display.
4. Function keys L2 and L3 Move the location of the selection box to select desired features. Pressing
L2 moves the box up and pressing L3 moves the box down.
5. Asterisk Indicates selected features.
Figure 3-51. RMS Feature Selection Page
3-99
TM 1-1520-248-10
SECTION IV. TRANSPONDER
3-80. TRANSPONDER SET. (3) M1 key Press to toggle ON or OFF as
desired.
a. Description. The AN/APX-100 IFF transponder
set provides an automatic response when properly (4) M2 key Press to toggle ON or OFF as
challenged by surface and airborne radar equipment. desired.
Control of the transponder is gained by pressing the
IFF key on the MFK or the IFF key on the MFD when (5) M3A + C key Press to toggle ON or OFF
the COMM page is displayed. All control functions are as desired.
then performed using the MFD and MFK. Page 2 of the
(6) If data is to be entered for Mode 1 or Mode 3
IFF pages displays the controls for the various mode
A + C, KYBD key Press and enter data using MFK.
tests. These tests may be conducted while the
helicopter is on the ground or in flight with the
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
TECHNICAL MANUAL OPERATOR’S MANUAL FOR ARMY OH-58D HELICOPT(84)
