曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
the limitation, only the contents within the defined size are shown in the Stream view.
Keep recent open file count:
Define a limit for keeping recent open file.
Enable passive name resolution
Enable passive name resolution, Colasoft Capsa will automatically resolve the name of captured IP address.
o Save Resolved Name for IP address when Capsa exit.
By default, Colasoft Capsa will automatically save the resolved names for IP addresses when you exit. If
uncheck, the resolved names will lose when you exit without saving them.
Packet Capture
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
o Remove unused names after
Colasoft Capsa will remove the resolved names which unused more than 2 days in default.
Reset
Click this button to restore the predefined settings.
Options – Format
The Format dialog let you customize the format of data display. You can define the formats for data display,
including decimal places of normal number, decimal places of percentage, byte format, bit format, bytes per
second format and bits per second format.
• Decimal places of normal number
The display precision of a number. You can customize the decimal places though the thousandth in
default.
• Decimal places of percentage
The display precision of a percentage. You can customize the decimal places though the thousandth in
default.
• Byte format
By default, Colasoft Capsa displays packets sizes and the traffic in an appropriate byte unit, such as B, KB,
MB, GB, or TB. Which unit is selected depends on how large each packet or the current traffic is. Users
can define the unit from the combo box.
• Bit format
By default, Colasoft Capsa displays packets sizes and the traffic in an appropriate bit unit, such as b, kb,
Mb, Gb or Tb. Which unit is selected depends on how large each packet or the current traffic is. Users can
define the unit from the combo box.
• Bytes per second format
Rate at which bits of information are transmitted. Colasoft Capsa displays the rate of information in an
appropriate unit, such as Bps, KBps, MBps, GBps or TBps. Users can define a display format from the
combo box.
property of their respective owners. 44 / 44
Packet Capture
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
• Bits per second format
Rate at which bits of information are transmitted. Colasoft Capsa displays the rate of information in an
appropriate unit, such as bps, Kbps,
Mbps, Gbps or Tbps. Users can define a display format from the combo box.
Options - Decoder
The packet decoders are the essential engines to decode packets. All available decoders are enabled by default,
but you can close those you don't need to increase the program performance. If you close a decoder in the list,
Colasoft Capsa will not decode the specific protocol elements when encounters a packet of the same type until
you enable it again, as a result you can not view the decode information of that packet.
To open the Options - Decoder page, select Options... from the Tools menu and then press the Decoder tab. All
decoders are listed by protocol and marked with a tick indicating they are enabled, use the check box before every
decoder to disable it.
property of their respective owners. 45 / 45
Packet Capture
Network Analyzer
© 2009 Colasoft. All rights reserved. Colasoft®, the Colasoft logo, Capsa® are among the trademarks or registered trademarks of the company in
the United States and/or other countries. All other trademarks are
Options - Analyzer
The Analyzer page list the advanced analyzers, all of them are enabled in default. To reduce resource occupation
and improve the global efficiency, users can close a analyzer by uncheck the box before it to get more clear view
of the analysis results.
property of their respective owners. 46 / 46
When you disable an analyzer in the Analyzer page, Colasoft Capsa will stop analyzing the corresponding
protocol elements or displaying the analysis results in the relative views or settings until you enable it again. The
following table is the views affected by every analyzer.
Analyzer Relative views or settings
Email Analyzer Module
Summary view, Logs view, Reports view, Graphs view, Project
Settings - Diagnosis, Project Settings - Log
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料27(35)
