曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
32/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Flight Order Flight Test/Activity Document established by the Flight Test Engineer responsible for the test flight
and countersigned by the Pilot in command. It defines the tests to be performed
during a flight and includes test procedures, A/C applicable limitations and
safety procedures. The Flight Order is a legal document which is transmitted to
the Airworthiness Authorities and which must be duly signed prior to the flight. A
copy of the Flight Order remains on ground while the aircraft is in flight.
Flight Plan Aircraft Operation/Flight
Operations
Specified information relating to the intended flight of an aircraft that is filed
orally or in writing with an Air Traffic Control (ATC) facility.
Flight Plan Computation
Program
Aircraft Operation/Performance
Engineering
The FLIP permits the computation of complete flight profiles. The FLIP works
from the High Speed (HSP) data base.
A300B/A310/A300-600/A320
Flight Test Analysis Flight Test/Activity Software system used to manage all flight test activity, eg: programs, A/C
activity.
Flight Test Installation Aircraft Operation/Flight
Operations
All the equipment fitted to an aircraft for in-flight test measurements.
Flight Test Management
System
Flight Test/Activity Replaced by FTA, Flight Test Analysis.
Flight to Hamburg Planning Date indicated in production programs. It generally coincides with the start of
the interior furnishing phase done by Airbus Deutschland GmbH at Hamburg.
Flight to Toulouse Planning Date indicated in production programs. It generally coincides with the end of the
interior furnishing phase done by Airbus Deutschland GmbH at Hamburg.
Flight Training Device Training A full scale replica of an aircraft instrument, equipment panel and control in an
open cockpit area or an enclosed aircraft cockpit. Four levels are defined in the
AC 120-45A: levels 4, 5, 6, 7.
Levels 4 and 5 corresponds to the Cockpit System Simulator (CSS).
Level 7 corresponds to the Fixed Base Simulator (FBS).
FAA: AC 120-45A
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
33/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Floor Panels Common Terms/Aircraft
Constituent Items
Floor Panels are an integrated part of the aircraft structure.
Some Floor Panels are fitted during the production phase of the aircraft section
affected. The remainder in areas of Lavatory/Galley installation (flexible zones)
are replaced by Dummy Parts/Panels.
Fulfill Organization/Management
Implementation
To carry out: accomplish, execute. WD
Full Flight Simulator Training A simulator including a visual system providing an out-of-the cockpit view and a
force (motion) cueing system. It is in compliance with the standards specified in
AC 120-40B as amended (four levels exist: A, B, C, D).
Full Production
Subcontracting
Subcontracting Production subcontracting planned on a medium or long term basis for
organizational reasons. Covers development and series phase activities, for
Production only.
Full Provision Industrialization/Provisions Full Provision for a specific item or set of items or equipment shall mean that,
for example, all supports, brackets, tubes and fittings, electrical wiring and
hydraulic lines, shall have been installed, except where this is not technically
acceptable for normal operation, that space has been allocated and that
installation of the specified item(s) can be made with the minimum of alteration
to the aircraft.
Systems for which Full Provision is installed shall be certified such that
operation is permitted when the item(s) of equipment are incorporated. On
aircraft to be delivered, only ground testing of Full Provision will be performed
and the Buyer may be required to provide equipment necessary for ground
testing and system certification.
Full Subcontracting Subcontracting Subcontracting of all obligations.
Approved Terms © Airbus SAS 2007. All rights reserved. Confidential and proprietary document.
34/79
19 Mar 07
Term Domain Definition Source
Lexinet - Airbus Reference Language
Approved Terms
Function Organization/Airbus A function in organizational terms represents the main fields of activities of the
Company to which specific accountabilities have been assigned to.
The main functions of Airbus are:
General Management, Operations, Engineering, Manufacturing, Information
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料4(34)
