曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
The “SQ” for the HF-9000 toggles between “SQ OFF” and the previously selected
“SQ” level (MIN, MED, MAX). The “SQ” level is selected on the HF control page.
TUNE
SQ
ID
DIM
PGE
1/2
TST
STO
DME
GX_05_015
Function
Keys
TUNE
Control Knob
SQ
ID
DIM
PGE
1/2
TST
STO
DME
GX_05_016
COM 1 SQ NAV 1
ATC-TCAS ADF 1
TEMP-1 TEMP-1
118.00
130.27
112.00
113.10
P I LOT T R A I N I N G GU I D E
COMMUNICATIONS
5-14 For Training Purposes Only
Sept 04
Pressing the DIM key connects the RMU brightness control to the tuning knob and the
RMU brightness display will appear. The display brilliance is then adjustable using the
TUNE control knob on the RMU.
Pressing the cross-side (1/2) key, with the cursor in a window (except ATC TCAS)
display transfers the entire RMU operation and display to the cross-side radio system.
The legend color changes from white to magenta when the RMU is displaying, and is
in control of data associated with the cross-side system. Pressing the 1/2 key with the
cursor on the mode line of the ATC-TCAS window and the transponder in other than
STANDBY mode allows to switch between transponder 1 and 2
TUNE
SQ
ID
DIM
PGE
1/2
TST
STO
DME
GX_05_017
COM 1 NAV 1
TCAS DSPY 1
ATC-TCAS
HF 1
ADF 1
ALT: REL 15423
15600
LV
STANDBY ANT
TEMP-1 TEMP-1
NORMAL
118.00
130.27
1605
112.00
113.10
620.0
TUNE TO DIM DISPLAY
ANY KEY TO RETURN
SQ
ID
DIM
PGE
1/2
TST
STO
DME
GX_05_018
COM 1 NAV 1
TCAS DSPY 1
ATC-TCAS
HF 1
ADF 1
RANGE: 6 2000
2000
UV
STANDBY ANT
MEMORY-1 TEMP-1
NORMAL
118.00
131.27
1605
131.10
112.00
620.0
COM 1 NAV 1
TCAS DSPY 1
ATC-TCAS
HF 1
ADF 1
RANGE: 6 2000
2000
UV
STANDBY ANT
MEMORY-1 TEMP-1
NORMAL
118.00
131.27
1605
131.10
112.10
620.0
For Training Purposes Only
Sept 04
5-15
P I LOT T R A I N I N G GU I D E
COMMUNICATIONS
Pressing the page (PGE) key once will change the RMU display to the Menu page.
When not on the radio tuning page (main or system page), the RMU assigns a
RETURN function to the lower left line select key. Pressing this key returns the
display to the radio tuning page.
Pressing the store (STO) key results in a temporary (TEMP) COM/NAV preselect
frequency to be stored in memory.
The temporary preselect frequency is assigned a numbered location, provided the
curser has been first placed around that frequency or code.
SQ
ID
DIM
PGE
1/2
TST
STO
DME
GX_05_019
SYSTEM 1 PAGE MENU
RADIO PAGE
COM MEMORY
NAV MEMORY
ATC/TCAS
HF CONTROL
HF MEMORY MAINTENANCE
COM 1 NARROW
MORE INSERT
RETURN DELETE
118.00
130.27
151.67
133.00
MEMORIES
1 4
2 5
3 6
BANDWIDTH
SELECT
SQ
ID
DIM
PGE
1/2
TST
STO
DME
GX_05_020
COM 1 NAV 1
ATC-TCAS ADF 1
TEMP-1 TEMP-1
118.00
130.27
112.00
113.10
COM 1 NAV 1
ATC-TCAS ADF 1
MEMORY-1 TEMP-1
118.00
130.27
112.00
113.10
P I LOT T R A I N I N G GU I D E
COMMUNICATIONS
5-16 For Training Purposes Only
Sept 04
While on the main tuning page, press the “PGE” function key once to display
SYSTEM 1 PAGE MENU. Next press the line select key for the COM MEMORY to
view the frequency held in memory.
Pressing the identification (ID) key places the transponder in the identification
response mode. The transponder will go into ident mode for approximately 18 seconds
when the ID function key is pushed and an ID annunciator will appear.
SQ
ID
DIM
PGE
1/2
TST
STO
DME
GX_05_021
COM 1 NAV 1
ATC-TCAS ADF 1
MEMORY TEMP-1
118.00
130.27
112.00
113.10
COM 1 NARROW
MORE INSERT
RETURN DELETE
118.00
130.27
MEMORIES
1 4
2 5
3 6
BANDWIDTH
SELECT
SYSTEM 1 PAGE MENU
RADIO PAGE
COM MEMORY
Step 1
Step 2
SQ
ID
DIM
PGE
1/2
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
庞巴迪挑战者手册2(43)
