曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
OUTER
HANDLE
ARTICULATED
GALLEY SERVICE DOOR
WINDOW
VENT FLAP
HINGE
Vol. 1 06--30--4
DOORS
Galley/Service Door REV 3, May 03/05
Flight Crew Operating Manual
CSP C--013--067
A. Opening the Galley Service Door from Inside
To open the galley service door from inside:
S Rotate the inner handle counter-clockwise to the OPEN position.
S The door moves up, to clear the door stop fittings (guided by door rollers
within track fittings).
S The two lower latches disengage from the door lower frame latch fittings.
S The vent flap opens.
S Push the door outward and forward until it locks in open position.
B. Closing and Latching the Galley Service Door from Inside
To close and latch the galley service door from inside:
S Pull the hinge latch lever, to release the door from the locked open position.
S The door moves aft, in front of the door opening.
S Pull the door in to engage the rollers in the door track fittings, then rotate the inner
handle to the CLOSED position (clockwise).
S The door slides down, behind the door stop fittings (guided by door rollers
within track fittings).
S The two lower latch pins fully engage in the door frame latch fittings.
S The vent flap closes.
S Verify the correct indication of door latch through the indicator window located at the
lower aft corner of the door.
S The green mark on the indicator sector aligns with the green mark on the
indicator window.
C. Opening the Galley Service Door from Outside
To open the galley service door from outside:
S Release the outer handle from the door recess.
S The door latch mechanism unlocks.
S The vent flap opens.
S Rotate the outer handle fully clockwise to the OPEN position.
Vol. 1 06--30--5
DOORS
Galley/Service Door REV 3, May 03/05
Flight Crew Operating Manual
CSP C--013--067
S The door moves up, to clear the door stop fittings (guided by door rollers
within track fittings).
S The two lower latch pins disengage from the door frame latch fittings.
S Pull the door outward and move it forward until it locks in position.
D. Closing and Latching the Galley Service Door from Outside
To close and latch the galley service door from outside:
S Pull the latch lever, to release the door from the locked open position.
S The door moves aft into the door opening.
S Push the door in to engage the door rollers in the track fittings, then rotate the outer
handle counter-clockwise to the CLOSED position until it lines up with its recess.
S The door slides down, behind the door stop fittings (guided by door rollers
within track fittings).
S The two lower latch pins engage in the door frame latch fittings.
S Release the handle.
S The outer handle springs into its recess.
S The vent flap closes as the outer handle gets near the end of its travel.
Vol. 1 06--30--6
DOORS
Galley/Service Door Sep 09/02
Flight Crew Operating Manual
CSP C--013--067
Service Door --- EICAS Messages <1001, 2224>
Figure 06---30---3
Vol. 1 06--40--1
DOORS
Avionics Bay Door Sep 09/02
Flight Crew Operating Manual
CSP C--013--067
1. AVIONICS BAY DOOR
The avionics compartment door is used to gain access to the equipment in the avionics
compartment. It is located on the centerline of the lower forward fuselage. The door opens
inward and moves up on four spring--loaded roller arms. The roller arms engage a set of
tracks that allows the door to be moved forward or aft in the avionics compartment. The
door does not open from the inside.
The door outer handle is rotated to the OPEN position to unlatch and to the CLOSED
position to latch.
Vol. 1 06--40--2
DOORS
Avionics Bay Door Sep 09/02
Flight Crew Operating Manual
CSP C--013--067
Avionic Bay Door
Figure 06---40---1
EXTERNAL
HANDLE
DOOR TRACK
FORWARD LATCH FITTING
TRIGGER
PLATE
KEY
LOCK
DOOR ROLLER
(TYPICAL)
AFT LATCH PIN
COUNTER
BALANCED
DOOR
PROXIMITY
SENSOR
PROXIMITY
SENSOR
Vol. 1 06--40--3
DOORS
Avionics Bay Door REV 3, May 03/05
Flight Crew Operating Manual
CSP C--013--067
A. Opening the Avionics Bay Door
To open the avionics bay door:
S Press the outer handle trigger plate.
The handle ejects from the door recess.
S Rotate the handle 90 degrees counterclockwise to the OPEN position.
The fwd and aft latch pins disengage from the door frame latch fittings.
S Push the door up.
A latch on the roller arms locks the door in the up position.
S Rotate the the outer handle to the CLOSED position and push the handle into the
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
庞巴迪挑战者手册2(100)
