• 热门标签

当前位置: 主页 > 国内新闻 >

时间:2010-05-17 21:27来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

– Altitude reference is
corrected barometric altitude.
ALTXXX displays on MFD.
TCAS TEST Key
Used to initiate TCAS selftest.
Takes normally about 8
seconds to complete
: the TCAS test is
disabled with the airplane in
the air
Note RETURN Key
Used to return to top level
page
TCAS Main Page
Used to select TCAS modes
and display formats
accessed through TCAS key
on top level page
Traffic Display Select Key
ON
OFF
Used to select display mode:
– Displays all
transponder-equipped traffic
(threat, proximate and other).
– Displays threat traffic
only
Altitude Range Select Key
NORM
ABOVE
BELOW
Used to select relative range
values:
– -2700 feet to
+2700 feet
– -2700 feet to
+9900 feet
– -9900 feet to
+2700 feet
TCAS Mode Select Key
AUTO
STBY
TA ONLY
– Traffic resolution
indication automatically
appears on vertical speed
indication.
– Standby.
– TRAFFIC
indication on PFD indicates
amber and flashes for TA
indication.
TCAS Display
P604_17_040
NAVIGATION SYSTEMS
17-86 For Training Purposes Only
May 03
P I LOT T R A I N I N G GU I D E
MFD TCAS Displays
The altitude, relative position, distance and vertical speed of mode C or mode S
transponder-equipped aircraft are displayed on the following MFD formats:
• MFD TCAS format
• MFD NAV SECTOR format, when the TFC button is pushed on the DCP
• MFD FMS MAP format, when the TFC button is pushed on the DCP
MFD TCAS Displays
Figure 17-58
Display Control Panel
Figure 17-59
The TFC button operates as follows:
• if the MFD is in NAV SECTOR or FMS MAP format at a range of 50 NM or less,
pushing the TFC button alternately selects or removes the clock position hash
marks and traffic display
• at MFD ranges greater than 50 NM in NAV SECTOR or FMS MAP format,
pushing the TFC button once removes the traffic display. Pushing the TFC button a
second time automatically displays the MFD TCAS format at 10 NM range
• if the MFD is in HSI or PLAN MAP format, pushing the TFC button automatically
displays the TCAS format at 10 NM range
P604_17_088
TCAS DISPLAY NAV SECTOR
LX/MAP G+1 USTB T+10.7
TAS 467 537
BDF
PMM
CYUL
JDT
22NM
153NM
737NM
40NM
0:07
1:33
0:05
:
:
:
:
DES
ADVISORY
1:11/ 616NM
ABOVE
BELOW DME2
– – – –
T-4.5
UTC22:15 GS SAT-49C TAT-20C
VOR1 ADF2
25
100
071
-20
-12
BDF
JOT
FMS MAP
JOT
ABOVE
BELOW
VOR1 VOR2
UTC01 : 50
TTG11 : 42
LOC1
IUL
CRS 059 FMS2 DTK 030
TAS 146 GS 145 SAT 10C TAT–13C
TGT
8.5NM YUL 12.7NM
TTG11 : 04
5
10
059
NAV SECTOR
RADAR OFF
-20
-12
LX/RADAR OFF G+3 USTB T+10.7
UTC 22:39 TAS 0 GS 0 SAT 15C TAT 15C
10
-20
-12
BDF
JOT
NAV
SOURCE
FORMAT RANGE
BRG TERR WX TFC
PU
SH
X-SIDE
P604_17_079
TFC Button
NAVIGATION SYSTEMS
For Training Purposes Only
Jan 04
17-87
P I LOT T R A I N I N G GU I D E
PFD TCAS Displays
Resolution advisories are displayed on the vertical speed indicator (VSI) portion of the
PFD. The VSI shows the appropriate vertical maneuver required to avoid a conflict.
PFD TCAS Display
Figure 17-60
PRIMARY FLIGHT DISPLAY
(PILOT'S AND COPILOT'S INSTRUMENT PANELS)
Traffic Resolution Advisory
Indication on Vertical
Speed Scale
– Indicates that
pilot is advised to fly out of,
or not to enter, indicated
vertical speed range
(corrective/preventive RA).
– Advises pilot
of vertical speed range
(corrective RA) to attain to
avoid traffic.
Red Band
Green Band
TCAS Message Area
TRAFFIC
TCAS FAIL
TCAS RA FAIL
TA ONLY
TCAS OFF
- RA (red) or TA
(amber) intruder detected.
(amber) -
Indicates TCAS failure.
(amber) -
Indicates TCAS resolution
advisory failure.
(white) - Indicates
that TCAS has been selected
to traffic advisory mode.
(white)
Indicates that TCAS has
been selected to standby
mode.
-
P604_17_041
BRT
N
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:庞巴迪挑战者手册2(13)