737-300 400 500 AMM 飞机维护手册 STANDARD PRACTICES - ENGINE(62)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

WARNING: DO NOT GET CLEANING SOLVENTS IN YOUR MOUTH OR EYES, OR ON
_______ YOUR SKIN. DO NOT BREATHE THE FUMES FROM THE CLEANING SOLVENT. PUT ON A PROTECTIVE SPLASH GOGGLE AND GLOVES WHEN YOU USE THE CLEANING SOLVENT. KEEP THE CLEANING SOLVENT AWAY FROM SPARKS, FLAME AND HEAT. CLEANING SOLVENT IS A POISONOUS AND FLAMMABLE SOLVENT WHICH CAN CAUSE INJURIES TO PERSONS OR DAMAGE TO EQUIPMENT.
 (b)  
Apply with a spray gun or soak the part in solvent to remove the remaining penetrant.

 (c)  
Make sure that all the internal areas and recesses are fully clean and dry. 1) Blow out the internal areas and recesses of the part with

 dry air.
 S 232-025-C00
 (8)  Quality Assurance
 (a)  
Examine the part below the ultraviolet light.

 1)  Make sure you remove all the penetrants and developer materials.

 (b)  
Make sure you remove the remaining compounds fully from the parts made of titanium and the titanium alloy.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 70-40-01
 ú  ALL  ú
 ú ú  ú C01.101 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.  Page 212Jul 12/02 

////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
STANDARD TOOLS AND EQUIPMENT - MAINTENANCE PRACTICES
____________________________________________________
 TASK 70-60-01-912-001-C00
 1. Standard Tools and Equipment
____________________________
 A. General
 (1)  This procedure contains the approved tools and equipment you use in the maintenance of the CFM56 engine.
 B. Procedure
 S 912-002-C00
 (1)  Use this List of Standard Tools and Equipment.
 Description___________  Supplier
 Bottles and Plastic Tubes in Local purchase
 which to put Oil Samples

 Vacuum Cleaner  Local purchase
 Heat Gun  Local purchase
 Feeler Gage Set  Local purchase
 Soft Nose Pliers Souriau Inc.
 Model Souriau 7765 Kester Avenue
 8498-03 Van Nuys, CA 91405 USA

 Souriau Et Cie 9-13 Rue Gallieni 92103 Boulogne-Billancourt France
 Crowfoot Wrench Snap-On Tools Company
 Model Snap-On TMRX10 8049 28th Avenue
 Kenosha, WI 53140 USA

 Fork Wrench Snap-On Tools Company
 Model Snap-On AN 8508-14 8049 28th Avenue
 Kenosha, WI 53140 USA

 3/8 inch Gimbal Joint  Local purchase
 3/8 inch Extension Bar  Local purchase
 3/8 inch Speeder Handle  Local purchase
 3/8 inch Drive Speedwrench  Local purchase
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 70-60-01
 ALL  ú ú C01 Page 201 ú Jul 12/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
STANDARD ENGINE WIRING AND EQUIPMENT CHECK - MAINTENANCE PRACTICES
__________________________________________________________________
 TASK 70-70-01-702-001-C00
 1. Standard Engine Wiring And Equipment Check
 A. General
 (1)  
This task has four topics:

 (2)  
The general instructions for the routing of the wiring harnesses.

 (3)  
The visual examination of the wiring harnesses.

 (4)  
A visual check of engine components, and harness connectors and receptacles.

 (5)  
The retention test for the connector sockets.

 B. Consumable Materials
 (1)  B00682 Solvent, (CP2011) stoddard - PD 680, Type I or II
 C. Access
 (1)  Location Zones
 411 Engine 1 - Engine
 421 Engine 2 - Engine

 D. General Instructions On The Routing Of The Wiring Harnesses
 S 822-002-C00
 (1)  Wire harness routing.
 (a)  
Make sure that all clamps are in their correct position and installed correctly.

 (b)  
Make sure that the wire bundle length is equally distributed between the attached parts and is not stressed.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 STANDARD PRACTICES - ENGINE(62)