B. Temporary Marking Materials
S 912-005-C00
CAUTION:_______WHEN IT IS NECESSARY, MAKE A MARK ON THE ENGINE PARTS. YOU CAN ONLY USE APPROVED MARKING COMPOUNDS. MARKING COMPOUNDS THAT ARE NOT APPROVED CAN CAUSE DAMAGE TO THE ENGINE PARTS.
YOU MUST NOT USE GREASE PENCILS OR LEAD (GRAPHITE) PENCILS TO MAKE A MARK ON THE COMBUSTION SECTION AND HOT SECTION PARTS. THESE MATERIALS AND HEAT CAN CAUSE DAMAGE TO THE PARTS.
(1) The materials that follow are commercially available to make a mark on the parts:
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
70-10-03
ALL ú ú C01 Page 201 ú Jul 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
Material________ Manufacturer
Chalk Local Purchase
Dykem (red, yellow or Dykem Company black) 2307 West 11th St. St. Louis, MO 63108
No. 33, 44, or 55 Mark-Tex Corp.
Action Marker 163 Coolidge Ave. Englewood, NJ 07631
Dixon (black or Jos. Dixon Crucible Co.
yellow) 167 Wayne St. Jersey City, NJ 07303
Dykem Steel Blue Dykem Company DX100
Soapstone Local Purchase
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
70-10-03
ALL ú ú C01 Page 202 ú Mar 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
LOCK PROCEDURES - MAINTENANCE PRACTICES
_______________________________________
1. General
_______
A. This procedure tells the usual procedures to install this lock device:
-the self-locking, hexagonal and castellated nut
B. This procedure tells how to attach parts with the use of these:
-
the cotter pin
-
the tab washer
-
the lockwire.
C. The lock devices are safety devices to keep the fasteners and other parts engaged.
D. The lock devices prevent all opposite forces that can cause the fasteners to disengage.
E. Do not use the lock devices to apply or keep a torque.
F. The lock devices are related to safety and you must install them with the best shop procedures.
TASK 70-20-01-912-001-C00
2. Install the Self-Locking, Hexagonal and Castellated Nut
_______________________________________________________
A. Procedure (Fig. 202)
LOCKWASHER
CASTELLATED NUT
Castellated Nut Installation
Figure 201
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
70-20-01
ALL ú ú C01 Page 201 ú Jul 15/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A54679
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 912-002-C00
(1) You must examine the new or used nuts and compare them with the assembly specifications.
(a) You must discard the nuts that do not agree with the specifications.
S 912-003-C00
(2)
Make sure the threads of a stud or bolt shank come out of the nuts with a minimum of one thread (unless otherwise specified).
S 912-004-C00
(3)
Use a torque wrench to apply the correct torque values.
TASK 70-20-01-912-005-C00
3. Install the Cotter Pin
______________________
A. Procedure
BENT
TAB
S-M56-MM-0313-(1)-00-B
Cotter Pin Installation Figure 202
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 STANDARD PRACTICES - ENGINE(38)
