737-300 400 500 AMM 飞机维护手册 STANDARD PRACTICES - ENGINE(24)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 Pickup  Move one material into or on the surface of a different one that  BurrGall
 touches it, usually its a cause of friction-heating.  ImbedmentInclusion Pile-up Protrusion
 Metallization
 Pinched  Distortion of the surfaces of  Bound
 the parent material, caused by pressure.  CompressedFlattened Seized
 Smashed (without separation in pieces) Squashed Squeezed
 Pit  A small hole that does not have  Corrosion
 sharp, high-stress corners in the surface of the material. Pits are usually caused by a chemical reaction (rusting, chemical corrosion).  CraterElectrolytic cavityInclusionPerformationPinholes Pock-marked
 Porosity  Areas that contain many pits or pinholes.  PitPinholes
 Rub  A surface that is pushed in or moved is caused by two surfaces that move while they touch each other.  If impression isshallow and smooth,see "Wear"; ifimpression is sharp, see "Scratch".

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 70-00-01
 ALL  ú
 ú  C01  Page 208
 ú  Nov 15/91 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
Terms_____  Definition__________  Associated Terms________________
 Scale  A layer of metallic oxides that forms by a chemical action of oxygen on the outside surface of the metal, usually while hot. Burn
 Scratch  A long, thin, sharp-cornered impression caused by a sharp object that moves across the surface of the parent material.  AbrasionChafeFurrowGroove Score
 Seizure  A welding or binding of faces prevents more movement.  Bound upFrozen Tight Wedged Welded (without external heating)
 Shingling  A condition when one fan blade mid-span shroud moves on the other (usually when something hits the fan). The condition can also occur to the blade tip shrouds on the LPT rotor (Stg. 3 and 4). The condition on the LPT is usually caused by a pre-twist that is not there, too much radial movement, etc. Bound upShingledWedged
 Spalling  Small particles of metal that crack or flake off of the surface, usually in thin layers or specific spots. FlakingFrettingGalling
 Unbalance  When you put a balanced component out of balance. Usually "imbalance".
 Varnish film  A hard surface-film of not fully carbonized hydrocarbon, such as oil, which is built up when the part is heated to or above the breakdown-point of the fluid. BandedDiscoloredOxidizedStained

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 70-00-01
 ALL  ú ú C01 Page 209 ú Nov 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
Terms_____  Definition__________  Associated Terms________________
 Wear  Related to the slow removal of  Abrasion
 the parent material in the  Attrition
 process of operation (not always  Brinnelled
 visible to the naked eye).  Chafed
 Chattering
 Erosion
 Fraying
 Fretting
 Friction
 Galling
 Glazing
 Groove
 Interference
 Oxidation
 Roughness
 Rubbed
 Scarfed
 Scuffed
 Uneven
 Weak

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 70-00-01
 ALL  ú
 ú  C01  Page 210
 ú  Nov 15/91 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
C.  Abbreviations
 S 912-010-C00
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300 400 500 AMM 飞机维护手册 STANDARD PRACTICES - ENGINE(24)