曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
* Front course.
Line 1L shows the GROSS WT prompt. Calculated gross weight
as shown on the PERF INIT page or pilot entered value is
shown. If the calculated gross weight is not valid, box prompts
show.
Line 2L shows the GA N1 prompt. The go-around N1 Limit
shows for both engines.
Line 3L shows the LANDING REF prompt. This lets the flight
crew select either QNH or QFE as the landing reference. The
selection for QNH/QFE made on the TAKEOFF REF page shows
on this page. If QFE is selected by the flight crew, selection of
baro correction on the EFIS control panel to STD causes the
LANDING REF to change to QNH.
Line 4L shows the runway length prompt. This data field shows
the runway length for the destination runway in feet and meters.
This data field clears at flight completion.
Line 5L shows the arrivals approach identifier. If an ILS
approach is selected in the active flight plan, the ILS frequency
and identifier shows. If there is no ILS approach selected in the
flight plan, this header and data field is blank.
Line 6L shows the INIT/REF INDEX prompt. This selects the
INIT/REF INDEX page.
Lines 1R, 2R, and 3R show the VREF prompts. These show the
calculated VREF speeds for the three flap settings at the
calculated gross weight. Initially, the VREF speeds shows in
small font until the flight crew selects one specific speed, then it
shows in large font. In the example shown, the VREF speed for
flaps 30 was selected by the flight crew.
FMCS - DISPLAYS - CDU - APPROACH REFERENCE PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.67
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-096
Line 4R shows the WIND CORR prompt. The wind correction is
added to the VREF speed selected in the VREF speed data field.
The default value is +05 knots and the allowable entry range is
0 to 20 knots.
Line 5R shows the FRONT CRS prompt. This shows the front
course if an ILS or LOC shows in line 5L. If there is no ILS or
LOC in line 5L, this data field is blank. The front course value
has a suffix of a T if the course is relative to true north.
Line 6R shows the ALTN DEST prompt. This selects the
alternate destination pages.
FMCS - DISPLAYS - CDU - APPROACH REFERENCE PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.68
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-096
FMCS - DISPLAYS - CDU - APPROACH REFERENCE PAGE
FMCS - DISPLAYS - CDU - APPROACH REFERENCE PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.69
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-096
General
The navigation reference data pages let the flight crew review
data from the permanent, temporary, or supplemental
navigation data base for these references:
* Waypoint
* Navaid
* Runway
* Airport.
Waypoints, navaids, and airports not in the data base are
entered into the temporary navigation data base from these
pages. This is the reference data the crew can see on the CDUs:
* Reference navigation data (REF NAV DATA)
* Temporary navigation data (TEMP NAV DATA)
* Supplementary navigation data (SUPP NAV DATA).
Reference Navigation Data
On these pages, the crew examines navigation data for these
references that are in the data base:
* Waypoints
* Airports
* Navaids
* Runways.
You get access to this page by selection of NAV DATA (LSK 1R)
on the INIT/REF INDEX page. Also, you get access by selection
of INDEX on the NAV SUMMARY page or the individual
identifier pages.
Line 1L shows the WPT IDENT prompt. The waypoint or runway
identifier is entered here.
The waypoint identifier page shows this data for the specified
waypoint:
* Latitude and longitude
* Magnetic variation
* Reference identifier
* Radial/distance.
The runway identifier page shows this data in feet and meters
for the specified runway:
* Airport identifier
* Latitude and longitude
* Elevation
* Runway length (feet and meters).
Line 2L shows the AIRPORT IDENT prompt. The airport
identifier is entered here.
The airport identifier page shows this data:
* Latitude and longitude
FMCS - DISPLAYS - CDU - NAVIGATION REFERENCE PAGES
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.70
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737NGAMM4(5)
