TB20 MAINTENANCE MANUAL 20 STANDARD PRACTICES AIRFRAME TB20飞机维护手册 20 标准施工机体(18)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

NOTE : It is often recommended to repaint the whole panel when the repair area is located at the panel centre.
4. "POLYURETHANE MAPAERO" PAINTS
NOTE : Correspondences between SOCATA references and paint codes - refer to 20-10-00. NOTE : After paint touch-ups or rectifications on control surfaces, check balancing.
S / N 1600 - 9999
A. Complete paint renewal
1) Preparation
OPERATIONS PRODUCTS SUPPLIERS REMARKS
MASKING / / /
DEGREASING CLEANING AGENT
(TB 11-912) / /
SANDING ABRASIVE CLOTH
(TB 05-9161) / DRY
BLOWING / / /

AAAA
Validity : S / N 1 - 9999 20 00-03Page 205
(BA) JUN 02
 

OPERATIONS PRODUCTS SUPPLIERS REMARKS
WASHING CLEANING AGENT
(TB 11-912) / /
WASH PRIMER COAT WASH PRIMER (TB 16-900) MAP If bare upholsterings
5 to 10 la - 2 h mini at
20°C (68°F)
PRIMER COAT PRIMER P23 (TB 16-901) MAP 15 to 20 R - 2 h mini at
23°C (73°F)
CEMENTING PRIMER P28B (TB 16-902) MAP POSSIBLE - 3 h to
24 h at 23°C (73°F)
SANDING (IF CEMENTING) ABRASIVE CLOTH
(TB 05-9161) / DRY
CLEANING (IF SANDING) CLEANING AGENT
(TB 11-912) / /
WIPING (IF CLEANING) PAD PROCHIM /
PRIMER COAT (IF CEMENTING) PRIMER P23 (TB 16-901) MAP 15 to 20 ti - 2 h mini at 20°C (68°F)

2) Base shade
OPERATIONS PRODUCTS SUPPLIERS REMARKS
FIRST COAT AEROMAP 1000 MAP 10 to 15 [A, - 2 h mini
at 20°C (68°F)
SECOND COAT AEROMAP 1000 MAP 10 to 15 IA - 2 h mini
at 20°C (68°F)
THIRD COAT AEROMAP 1000 MAP 10 to 15 ILt - 2 h mini
at 20°C (68°F)
FOURTH COAT AEROMAP 1000 MAP 10 to 15 [1, - 2 h mini
at 20°C (68°F)

3) Decoration
OPERATIONS PRODUCTS SUPPLIERS REMARKS
MASKING / / /
SANDING SCOTCH BRITE 3M /
WIPING PAD / /
REFER TO STEP 2) / / /

AAAA
Validity : S / N 1 - 9999 20-00-03Page 206
(BA) SEP 04
 
B. Partial paint renewal
When large areas of "polyurethane MAPAERO" paint have to be repaired, a polyurethane paint of same kind must be used.
The operations to be performed are the same as for a complete paint renewal. However, should fine scratches, stains or pitting appear after chemical aggressions, the application of spray paints which bring glossiness and color, but in no case the same protection as polyurethane paints, may be used.
However, the area to be repaired has to be sanded with abrasive cloth (TB 05-916H) to help paint adherence.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：TB20 MAINTENANCE MANUAL 20 STANDARD PRACTICES AIRFRAME TB20飞机维护手册 20 标准施工机体(18)