EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-22-10
ALL ú ú 09 Page 404 ú Sep 28/99
A
757 MAINTENANCE MANUAL
ENGINE FUEL SHUTOFF VALVE ACTUATOR - REMOVAL/INSTALLATION
_________________________________________________________
1. General_______
A. The actuator of the engine fuel shutoff valve is installed on the rear spar, out of the fuel tank. Each actuator is found aft of the fuel measuring stick No. 3 in each main fuel tank (AMM 28-44-00/001).
B. It is not necessary to defuel the fuel tank to remove the actuator.
C. This procedure contains two tasks. The first task removes the actuator of the engine fuel shutoff valve. The second task installs the actuator of the engine fuel shutoff valve.
D. The procedure to remove and install the adapter shaft and the valve body is contained in AMM 28-22-01/401.
TASK 28-22-11-004-001
2. Remove the Actuator of the Engine Fuel Shutoff Valve (Fig. 401)____________________________________________________
A. Equipment
(1)
Hex key wrench (9/64-inch) with 6 inch
extension - commercially available
B.
References
(1)
AMM 06-44-00/201, Wing Access Doors and Panels
C.
Access
(1)
Location Zones
551 Rear Spar to MLG Support Beam (Left)
651 Rear Spar to MLG Support Beam (Right)
(2)
Access Panels
551BB Access Panel (Left)
651BB Access Panel (Right)
D.
Procedure
S 864-015
(1)
For the left actuator, open this circuit breaker on the main power distribution panel, P6, and attach a DO-NOT-CLOSE tag:
(a)
6E1, FUEL VALVES L SPAR
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 燃油 CHAPTER 28 - FUEL 3(94)