757
MAINTENANCE MANUAL
S 215-006
WARNING:_______ MAKE SURE THAT ALL PERSONS AND EQUIPMENT ARE AWAY FROM THE NOSE
GEAR BEFORE THE RUDDER PEDALS ARE OPERATED. THE NOSE WHEELS
CAN TURN QUICKLY AND CAUSE INJURY TO PERSONS AND DAMAGE TO
EQUIPMENT.
(4)
Push the left rudder pedal to its full forward position and do this check:
(a)
Make sure the position indicator arrow for the rudder moves to the left full travel mark.
NOTE: At full travel, the indicator arrow can be
____ approximately one-half an arrow width away from the full travel mark.
TOWING LEVER LOCKPIN
TOWING LEVER (IN TOW POSITION)
TOWING
LEVER
SEE D TOWING LEVER
D
Rudder Position Indicating System Adjustment Figure 501 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-28-00
ALL ú ú 01 Page 503 ú Jun 20/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
S 215-007
(5)
Push the right rudder pedal to its full forward position and do this check:
(a)
Make sure the position indicator arrow for the rudder moves to the right full travel mark.
NOTE: At full travel, the indicator arrow can be approximately
____ one-half an arrow width away from the full travel mark.
S 215-008
(6)
Operate the rudder pedals until the rudder is in its neutral position and do this check:
(a)
Make sure the position indicator arrow for the rudder is on the neutral mark.
NOTE: Use a tolerance of +/- one-half an arrow width.
____
E. Put the Airplane Back to Its Usual Condition
S 865-009
(1)
Remove the power form the left, right, and center hydraulic systems (Ref 29-11-00).
S 865-010
(2)
Remove electrical power if it is not necessary (Ref 24-22-00).
TASK 27-28-00-825-011
3. Rudder Position Indicating System - Adjustment
______________________________________________
A. Equipment
(1)
Nose Gear Towing Lever Lockpin - A09003-1
(2)
Breakout Box and Cables, Rigging, Flight
Controls Position Sensors (from Breakout Box
Equipment A27063-88):
(a)
Breakout Box - A27063-2
(b)
Cable Assemblies -18, -19
(3)
Digital Voltmeter - John Fluke 8020B, John
Fluke Manufacturing Co., Inc., Everett,
Washington
(4)
Power Supply - Powertron Model 5900 (Adjustment
Procedure 1), Industrial Test Equipment Corp.,
Port Washington, New York
B.
Consumable Materials
(1)
D00015 Grease, Corrosion Preventive - BMS 3-24
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-28-00
ALL ú ú 01 Page 504 ú Sep 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
DVM
SIG
SIG TRANSMITTERHI LO CONNECTOR
A27063-2 BREAKOUT BOX
PROCEDURE 1
DVM
SIG
SIG
AIRPLANE
HI
LO
TRANSMITTER
CONNECTOR
CONNECTOR
D1742
45
RUDDER
POSITION
TRANSMITTER
A27063-18
A27063-19 CABLE ASSY
CABLE ASSY A27063-2 BREAKOUT BOX
LEGEND
DVM - DIGITAL VOLTMETER
PROCEDURE 2 NOTE: USE THE DVM TO MONITOR AIRPLANE POWER. THEN, CONNECT IT TO THE BREAKOUT BOX AND DO THE ADJUSTMENT.
Rudder Position Transmitter Adjustment
Figure 502
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
27-28-00
ALL ú
ú 01 Page 505
ú Jun 20/90
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 飞行操纵 FLIGHT CONTROLS 2(113)
