(8)
Make sure the alarm bell goes silent.
(9)
Make sure the warning horn makes no sound in approximately three seconds.
(10)
Make sure the two FIRE WARN lights go off.
(11)
Make sure the fire warning light in the wheel well comes on continuously.
(12)
Release the TEST switch on the P8-1 panel.
(13)
Hold the TEST switch on the P8-1 panel to the FIRE position.
(14)
Make sure these lights on the P8-1 panel come on:
(a)
All of the lights in the engine-1 fire switch
(b)
All of the lights in the engine-2 fire switch
(c)
All of the lights in the APU fire switch
(15)
Make sure the two FIRE WARN lights on the P7 panel come on.
(16)
Make sure the alarm bell in the control cabin operates.
(17)
Make sure the warning horn in the wheel well operates.
(18)
Make sure the fire warning light in the main wheel well flashes.
(19)
Push the FIRE WARN switch on the right side of the P7 panel momentarily.
(20)
Make sure the alarm bell immediately makes no sound.
(21)
Make sure the warning horn makes no sound in approximately three seconds.
(22)
Make sure the two FIRE WARN lights go off.
(23)
Make sure the fire warning light in the wheel well comes on continuously.
(24)
Release the TEST switch on the P8-1 panel.
(25)
Hold the TEST switch on the P8-1 panel to the FIRE position.
(26)
Make sure these lights on the P8-1 panel come on:
(a)
All of the lights in the engine-1 fire switch
(b)
All of the lights in the engine-2 fire switch
(c)
All of the lights in the APU fire switch
(27)
Make sure the two FIRE WARN lights on the P7 panel come on.
(28)
Make sure the alarm bell in the control cabin operates.
(29)
Make sure the warning horn in the wheel well operates.
(30)
Make sure the fire warning light in the main wheel well flashes.
(31)
Push the BELL CUTOUT switch on the P8-1 panel momentarily.
(32)
Make sure the alarm bell immediately makes no sound.
(33)
Make sure the warning horn makes no sound in approximately three seconds.
(34)
Make sure the two FIRE WARN lights go off.
(35)
Make sure the fire warning light in the wheel well comes on continuously.
(36)
Release the TEST switch on the P8-1 panel.
(37)
Hold the TEST switch on the P8-1 panel to the FIRE position.
(38)
Move the LIGHTS switch on the P2-1 panel to the DIM position.
(39)
Make sure the two FIRE WARN lights on the P7 panel decrease in intensity.
(40)
Move the LIGHTS switch on the P2-1 panel to the BRT position.
(41)
Make sure the two FIRE WARN lights on the P7 panel increase in intensity.
(42)
Pull the engine 1, the engine 2, and the APU fire switches.
501
26-11-0 Page 506 BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. Aug 01/96
CAUTION: DO NOT TURN THE FIRE SWITCH WHILE IT IS IN THE OUT POSITION. THE CONTENTS OF THE FIRE EXTINGUISHER BOTTLE WILL BE LET OUT.
NOTE: The switches must be free to move up without the use of the override button.
(43)
Push in the three fire switches to close.
(44)
Hold the TEST switch on the P8-1 panel to the OVHT position.
(45)
Move the LIGHTS switch on the P2-1 panel to the DIM position.
(46)
Make sure these indications on the P8-1 panel decrease in intensity:
(a)
The ENG 1 OVERHEAT light
(b)
The ENG 2 OVERHEAT light
(47)
Make sure these lights on the P7 panel decrease in intensity:
(a)
The two MASTER CAUTION lights
(b)
The OVHT/DET annunciator
(48)
Move the LIGHTS switch on the P2-1 panel to the BRT position.
(49)
Make sure these lights on the P8-1 panel increase in intensity:
(a)
The ENG 1 OVERHEAT light
(b)
The ENG 2 OVERHEAT light
(50)
Make sure these lights on the P7 panel increase in intensity:
(a)
The two MASTER CAUTION lights
(b)
The OVHT/DET annunciator
(51)
Pull the engine 1 and the engine 2 fire switches.
CAUTION: DO NOT TURN THE FIRE SWITCH WHILE IT IS IN THE OUT POSITION. THE CONTENTS OF THE FIRE EXTINGUISHER BOTTLE WILL BE LET OUT.
NOTE: The switches must be free to move up without the use of the override button.
501
Aug 01/94 BOEING PROPRIETARY - Copyright . - Unpublished Work - See title page for details. 26-11-0 Page 507
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737 AMM 飞机维护手册 防火 FIRE PROTECTION(15)
