曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Two dots will appear on the side of the flight path marker toward the
course arrow and perpendicular to the arrow. The dot closest to the flight
path marker represents a deftection of 4” off course, while the outermost
dot represents a deflection of 9” off course. When the aircraft crosses the
selected course, the arrow moves to the opposite side of the flight path
marker and the dots would appear on that side. For deviations of more
than 9”, the arrow pegs. If the arrow is centered on course, the dots
disappear. flight path marker centered over the course arrow indicates
being on course. For tacan bearings aft of +90”, the arrow will be dashed.
Box around TCN pushbutton legend indicates the tacan steering mode has
been selected.
TLN DEST STEERING Note
The following changes or additions occur when
destination steering is selected.
0
Command heading Indicates the heading required to steer to the waypoint destination
marker selected by the RIO. Where commanded heading is beyond display limits,
the marker will be pegged at the edge nearest to the commanded
heading.
0
Destination range Indicates distance to the selected waypoint.
@ iifJitFing mode Box around dest pushbutton legend indicates the destination steering
mode has been selected.
ORIGINAL
Figure 2-108. h@D VDI Formats - Takeoff, Landing, Navigation (Sheet 4 of 9)
2-202
NAVAIR WF14AADI
TLN TACAN STEERING
35 36 01
-3 -
--- ---
TLN DESTINATION STEERING
(AT&F5OD-342-Z
Figure 2-108. MFD VDI Fomats - Takeoff, Landing, Navigation (Sheet 5 of 9)
2-203 ORIGINAL
TLN DATA LINK STEERING
TLN AWL STEERING
ORIGINAL
Figure2 -108.M FD VDI Formats- Takeoff,L andingN, avigation( Shee6t of 9)
2-204
SYMBOL FUNCTION
TLN DATA LINK NOW
STEERING
The following changes or additions occur when data
link steering is selected.
0 Ezi;d Mach Indicates data link commanded math number.
0 Command heading Command heading marker is positioned relative to the magnetic heading
marker scale to indicate data link command heading. Where commanded heading
is beyond display scale limits, the marker will be pegged at the edge
nearest to the commanded heading.
0 Data link range
@ ;$i;d altitude
Indicates data link commanded range.
Indicates data link commanded altitude. The two digits displayed represent
thousands of feet.
0 Breakaway Appears as a f\asb+i’~ %yr&3 in the cemel ot the display. Symbol is
commanded by data link to indicate an immediate change in flight path is
warranted.
@ D/L steering mode 0ti around DjLpus’nbuIton legend indicates the data link steering mode
selection has been selected.
2-205 ORIGINAL
NAVAIR Ql-FlUAD-1
TLN AWL STEERING Note
The following changes or additions occur when AWL
steering is selected.
0 Command heading Positioned relative to the magnetic heading scale to indicate ACL data link
marker command heading. Where commanded heading is beyond display scale
limits, the marker will be pegged at the edge nearest to the commanded
heading.
0
Precision course vectors Consist of two independent vectors (vertical and horizontal) which form a
cross pointer. The horizontal vector responds to ILS glide slope error and
the vertical vector responds to ILS localizer error. Null/center indications
are provided to enable the pilot to null the error and keep the vertical and
horizontal needles centered.
@ Flight Director select The pilot’s FLT DIR pushbutton controls the display of the flight director on
the HUD. The FLT DIR pushbutton legend is displayed on the AWL VDI
format when valid navigation data is available and a/c vector or ACL data
link mode is selected. The pushbutton will toggle between boxed and
unboxed upon selection if the data link mode is ACL. The HUD flight
director is displayed when the FLT DIR pushbutton is boxed if the autopilot
is not engaged and MODE I control commands are being sent to the
aircraft. Boxing the FLT DIR legend enables display of the flight director.
c9
ACL steering indicator Provides ACL steering commands driven by the ASW-27C data link.
0
Waveoff During carrier landings, a large X will appear flashing in the center of the
display to indicate a waveofl command.
69
MFD AWL display select Permits option to display AWL (both ACL and ILS), ACL, ILS or no steering
information on the MFD. Initial selection of the AWL steering mode on the
basic VDI format displays both ACL and ILS steering information on the
MFD. This will be indicated by AWL in the box adjacent to the MFD legend.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
F-14D 飞行手册 Flight Manual 1(161)
