曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
N = narrow field of view, W = wide field of view, S = standby, or blank.
0
Recon steering symbol Provides elevation and ezimuth steering information when in
reconnaissance mode.
Figure 2-100. HUD Overlay Formats
2-105 ORIGINAL
MMGQBACKUP MODE
GUN MODE INDICATION
(Al-II--
Figure 2-l 01. BUD Manual Reticle Format
With a MEND display selected, format legends (Figure
2-103) are displayed around the edges of the CRT.
A format is selectedby cursor designation or by pressing
the pushbutton adjacent to the legend. When a format is
selected, its legend is highlighted on the display by endosing
it in a rectangular box.
When a display processor acknowledges a pushbutton
being depressedt,h e legend is boxed with a dashed
lime. When the MC acknowledges the pushbutton request,
the line becomes solid. If the MC does not acknowledge
the request,t he dashedb ox disappearsT. his
system is used to show the crew that the display system
has received the request. Selecting MEND only changes
the pushbutton legends. The current display remains
until a selection is made from MENU.
For convenience in describing format selection, numbers
are assigned to the pushbuttons starting from the
lower left side and counting clockwise. On the MENU1
display, PBl is the pushbutton corresponding to the
DATA legend.
From MENU1 the following formats may be selected:
1. PBl DATA - This selection presents one of
four OWN AK formats. The format to be displayeddependsonthepos.
itionoftheNAVMODE
switchintheRIOcock$t. EitherOWNA/Cbasic,
ground align, CVA (carrier align), or IFA (in-flight
align) formats will be displayed.
2. PB2 NAV - Selecting NAV presents one of 8
number of NAVAID or SAHRS ALIGN formats,
depending on alignment mode conditions. Formats
that may be displayed include NAV AID
options, NAV AID corrections, NAV AID enabled,
SAHRS ALIGN (NORM, MAG, SHDG),
or SAHRS ALIGN (CV).
3. PB3 - No selection.
4. PB4 TSD - This selection places thy tactical
situation display format on the display. Switching
logic prevents TSD formats from appearing
on more than one of the pilot MFDs. Therefore,
if TSD has been established on MFD2 and it is
selected for MFDl, it will appear on MFDl, and
be replaced on MFD2 with MENUl. Refer to the
Supplemental NATOPS Flight Manual,
NAVAIR 01-F14AAD-IA, for a description of
TSD formats.
ORIGINAL 2-166
SLAVED DEU
MFD3 FORMAT FORMAT
OWN A/C BASIC OWN A/C
OWN A/C GROUND OWN A/C
OWN AK CVA OWN A/C
OWN AIC IFA OWN AIC
HSD TACAN OWN A/C
HSD WAYPOINT WAYPOINT PLOT
WAYPOINT DATA 1 (Note 1) WAYPOINT
WAYPOINT DATA 2 (Note 2) WAYPOINT
RECON WPT DATA 1 (Note 6) WAYPOINT
RECON WPT DATA 2 (Note 7) WAYPOINT
CV MAN DATA (Note 3) CV ALIGN
CV SINS DATA (Note 4) CV ALIGN
css css
SMS SMS
SAHRS ALIGN (NORM, MAG, OWN A/C
SHDG)
SAHRS ALIGN (CV) CV ALIGN
NAVAID OPTIONS NAV AID
NAV AID ENABLED (Note 5) NAV AID
TSD NAV GRID
Votes:
[l) No slaved DEU format shall be established if
MFD 3’s previous format was WAYPOINT DATA
2 or RECON WPT DATA 1.
:2) No slaved DEU format shall be established if
MFD 3’s previous format was WAYPOINT DATA
1 or RECON WPT DATA 2.
13) No slaved DEU format shall be established if
MFD 3’s previous format was CV SINS DATA.
4) No slaved DEU format shall be established if
MFD 3’s previous format was CV MAN DATA.
5) No slaved DEU format shall be established if
MFD 3’s previous format was NAV AID
CORRECTIONS.
6) No slaved DEU format shall be established if
MFD 3’s previous format was RECON WPT
DATA 2.
7) No slaved DEU format shall be established if
MFD 3’s previous format was RECON WPT
DATA 1.
Figure 2-102. Slaved DEU Page Control
NAVAIR Ol-F14AAD-1
5. PB5 VDI - This selection places one ofseveral
VDI formats on the display. VDI formats are headdown
attitude displays presenting basic flight information
as well as steering and weapon delivery
cues. Format selection depends on PDCP MODE
pushbutton selection, steering selection, weapon
selection, and track or search modes.
6. PB6 - No selection.
7. PB7 CTVS - This selection displays video
from the HUD cockpit television sensor on the
MFD. The video consists ofa real-world view plus
the symbology appearing on the HUD.
8. PBS OBC - Selecting OBC places the ON
BOARD CHECKOUT basic format on the display.
From the basic format, other OBC formats
can be selected, allowing BITS to be commanded
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
F-14D 飞行手册 Flight Manual 1(153)
