曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
and test results to be displayed. There are 10 OBC
formats. Refer to Chapter 38 for a description of
these formats and their use.
9. PB9 CHKLST - This selection initially places
the TAKEOFF checklist on the MFD. From the
TAKEOFF format, the LANDING checklist may
be selected.P B9 toggles between TAKEOFF and
LANDING when CHKLST has been selected.
10. PBlO - No selection.
11. PB 11 HUD - This selection displays a repeat of
the current HUD symbology on the MFD.
12. PB12 TID - This selection displays a repeat of
the tactical information displaypresentationon the
MFD.
13. PB13 DD - This selection displays a repeat of
the digital display presentation on the MFD.
14. PB14 TCS - This selection displays the video
from the television camera set on the MFD.
15. PBl5 IRST - This selection displays the infmred
search and track system normal format on the
MFD.
16. PB16 HSD - This selection displays one of
three horizontal situation display formats on the
MFD. The format displayed will be the last previously
displayed. If no HSD format has been selected
after a cold start or system reset, then the
HSD waypoint format will be presented.
2-107 ORIGINAL.
NAVAIR 01.Fl4AAD-1
Figure 2-103. MFD MENU Displays
ORIGINAL 2-188
17. PB17 ECM - This selection places the ECM
format on the MFD. A second selection of ECM
while viewing the ECM format returns the
previous format to the MFD, providing that ECM
ORIDE has been selected and throat is being
reported.
18. PB18 MENU1 - This legend will be boxed. Selectionof
MENU1 when boxed presents MENUZ.
19. PB19 SMS - This selection places the stores
management system format on the MFD. In addition
to weapon test and select via the SMS format,
TACTS and SIM modes are enabled. Refer to
NAVAIROI-F14AAD-IAforacompletedescription
of TACTS and SIM modes. A second selection
of SMS while viewing the SMS format returns
the previous format to the MFD.
20. PB20 - No selection.
MENU2 (Figure 2-103) allows selection of the RECON
and JTIDS formats on the MFD.
21. PB21 JTID - This selection displays the JTIDS
OWN A/C DATA format. From the JTIDS OWN
A/C DATA format, the TSD MENU (TMENU)
or JTIDS Hook - TSD or TID format can be
selected.
2.33.9.1 High-Priority Formats. High-priority
formats include spin indicator, ECM, warning/caution/
advisory and system message displays.
2.33.9.1.1 Spin Indicator. If a spin condition is detected,
that is, if body yaw rate exceeds 30” per second,
a spin indicator format (Figure 2-104) is displayed on
MFD 1 and the TID, MFDs 2 and 3 display the VDI. If
MFD 1 is not on, the spin display will appear on MFD
2. When the spin condition is no longer valid (yaw rate
of 27” per second or less), the spin indicator format is
removed and the previous format is restored to the display
except as follows:
1. If conditions for the display of the ECM format
exist, the ECM format will appear on the display
instead.
2. If the previous format was a HUD, DD, or TID
repeat, MENU1 with a display of warning/
caution/advisory and/or data link (D/L) advisory
messages will be displayed.
3. If INS and SAHRS failures occur while the spin
arrow format is displayed, the pointer on the yaw
NAVAIR 01.F14AAD-1
rate scale is removed from the MFD, the spin arrow
is frozen, and an X is superimposedo ver the
spin arrow. The airspeed, AOA, and altimeter
scales are not obscured (refer to Chapter 11).
2.33.9.1.2 ECM Format. If the pilot and/or RIO
ECM switches (Figure 2-83) are set to ORIDE and a
threat is reported, the ECM format will override the
present formats on MFD 2 and/orMFD 3. ECM override
is enabled independently by pilot and RIO and may be
deselected independently. When the threat is no longer
being repotted, the ECM format is replaced by the previous
format. If MFD 2 is not on, the ECM format is
established on MFD 1. Only the spin indicator format
can override the ECM format.
The ECM format can also be selected manually by
pushbutton selection. The ECM legend appears on all
MFD formats above PB 17. When selected, the legend
is boxed. Pressing PB17 with ECM boxed returns the
previous format to the display. For further information,
refer toNAVAIR Ol-F14AAD-IA.
2.33.9.2 Warning/Caution/Advisory, System
Message, and Advisory Formats. Warning/
caution/advisory indications and data-link advisory
readouts appear as overlays on displays as required.
Figure 2-105 shows the locations of these overlays and
describes their control laws.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
F-14D 飞行手册 Flight Manual 1(154)
