曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
by the second computer (CLIENT). The two computers and simulation programs are connected together via
a network and a program called WideFS.
For networking you will require that each of your PC’s has a Network adaptor card. These are usually PCI
10/100base Ethernet cards. Once these are installed in each machine (as per manufacturers guide lines)
you need either to connect them together via a Hub (or switch), or the cheapest solution would be a simple
crossover Cable (if only two computers are to be connected). Please note that some operating systems will
not work well together using a crossover cable (e.g. XP and Win2000).
For new Network installations, after installing the Network cards you have to establish that the network is
able to see all the computers.
GAIFR Workgroups
Both computers must have the same Workgroup. This can be set via the Network Icon under the Windows
Control Panel. By clicking on the Identification tab you can enter the name of the Workgroup, for example,
FlightTraining. This has to be done on both computers.
GAIFR Computer Names
You can give each computer a different name, one could be called MSFS the other GAIFR – or whatever.
Giving the computers names makes it easier to identify them on the network.
GAIFR Protocols
Under the same Network box, you should be able to see which protocols are installed for your computer.
Project Magenta software now uses the TCP/IP network protocol as standard. Usually you will find that this
protocol is already installed. If not please select Add Service and select the TCP/IP under Microsoft
Services.
GAIFR Sharing
The last thing to do is to make sure that File Sharing is enabled on both of your computers under the same
Network tab.
GAIFR Step 2 Installation of WideFS and FSUIPC
FSUIPC
FSUIPC is a powerful program which has been developed by Peter Dowson over many years for MSFS.
Please see his extensive documentation for the more advanced features. For the GAIFR panel to operate
and communicate with MSFS a fully registered version of this software must be installed.
Project Magenta Revision: 26-May-07
65
a) Download and unzip FSUIPC from the Project Magenta website.
b) Copy the FSUIPC.dll file into MSFS Modules folder. That is all that needs to be done.
WIDEFS
Like FSUIPC you also need to download and install a fully registered version of WideFS. WideFS is a
program that allows the GAIFR panel and MSFS to communicate over the network. The program itself
comes with further detailed documentation, but for the most part installation should be very simple:
a) Download and Unzip WideFS. In your unzipped folder you will see a number of files.
b) Copy the Wideserver.dll & Wideserver.ini files into the MSFS Modules folder.
c) Copy the WideClient.exe and the WideClient.ini files into your GAIFR panel directory.
A registered version of FSUIPC must be installed in your MSFS Modules folder.
A registered version of WideFS is also required for network communications and the installation is as
follows.
WideFS is split into two main components as illustrated above.
The Wideserver component (Wideserver.dll and Wideserver.ini) are placed in your MSFS Modules folder.
That is all you need to do for the Sever component installation.
The Wideclient component (Wideclient.exe and Wideclient.ini) are placed on your client computers
(computer that you wish to connect to MSFS). You can create a folder perhaps called “WideClient” or copy
them into the PM main program folders – it actually does not matter. Each time you want communication
across the network with MSFS, Wideclient.exe must be running.
Step. 3 GAIFR Setting Server Name or Static IP
WideFS can use either the IPX network protocol for communication or TCP/IP. TCP/IP is now the standard
and we recommend its use on most systems. For IPX usage please refer to Peter Dowson’s documentation
included with the WideFS package.
Generally, after installation (as above) of the various files included in WideFS, as a basic rule you should
not actually have to do anything more but we also like to at least edit the wideserver.ini file, use a text
editor like Windows Notepad. Add the following entries in the first Section of the Wideserver.ini file:
ServerName= (your Server’s Name)
Or
Project Magenta Revision: 26-May-07
66
ServerIPAddr= (your Server’s IP address)
You only need to set either the ServerIPAddr or ServerName (not both). It is recommended that you use
the ServerName option. Then add to the same ini file ProtocolPreferred=TCP (or whatever protocol you
prefer) we recommend TCP at least to start with.
If you do not know how to find your ServerName or IP address please contact Project Magenta support or
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
航空资料12(109)
