• 热门标签

当前位置: 主页 > 航空资料 > 航空公司 >

时间:2010-07-29 10:50来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

ENTRY AREA LIGHTING CONTROL FORM THE FAP
To set the intensity of the entry area lights, press one of the following
pushbuttons:
-- ENTRY BRT to set the entry area lights to 100% visual brightness
-- ENTRY DIM 1 to dim the entry area lights to 50% visual brightness
-- ENTRY DIM 2 to dim the entry area lights to 10% visual brightness
To switch OFF the entry area lights, press the active (illuminated) pushbutton a
second time.
To switch ON the entry area lights again, press one of the pushbuttons ENTRY
BRT, ENTRY DIM 1 or ENTRY DIM 2. The entry area lights illuminate with the
corresponding brightness.
TR1 A318/A319/A320/A321 FLEET CCOM Page 6 of 23
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
CABIN LIGHTING SYSTEM
02.070
OCT 27/07
ENTRY AREA LIGHTING CONTROL FROM THE AAP
ALL
R (7)
To set the intensity of the entry area lights, press one of the following
pushbuttons:
-- ENTRY BRT to set the entry area lights to 100% brightness
-- ENTRY DIM 1 to dim the entry area lights to 50% brightness
-- ENTRY DIM 2 to dim the entry area lights to 10% brightness
To switch off the entry area lights, press the active (illuminated) pushbutton a
second time.
To switch on the entry area lights again, press one of the pushbuttons ENTRY
BRT, ENTRY DIM 1 or ENTRY DIM 2. The entry area lights illuminate with the
corresponding brightness.
TR1 A318/A319/A320/A321 FLEET CCOM Page 7 of 23
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
CABIN LIGHTING SYSTEM
02.070
OCT 27/07
CABIN ZONE LIGHTING CONTROL FROM THE FAP
ALL
R (8)
To set the intensity of the cabin zone lights, push one of the following
pushbuttons:
-- CABIN BRT to set the cabin zone lights to 100% brightness.
-- CABIN DIM 1 to dim the cabin zone lights to 50% visual brightness.
-- CABIN DIM 2 to dim the cabin zone lights to 10% visual brightness.
To switch OFF the cabin zone lights, push the active (illuminated) pushbutton a
second time.
To switch ON the cabin zone lights again, push one of the pushbuttons BRT, DIM
1 or DIM 2. The cabin zone lights illuminate with the corresponding brightness.
To switch ON or OFF all lights of the cabin use the MAIN ON / MAIN OFF
pushbuttons.
TR1 A318/A319/A320/A321 FLEET CCOM Page 8 of 23
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
CABIN LIGHTING SYSTEM
02.070
OCT 27/07
CABIN ZONE LIGHTING CONTROL FROM THE AAP
ALL
R (9)
In addition to the control from the FAP it is possible to control the cabin zone
lighting from the AAP.
The following pushbuttons are available to control the lights intensity of the
related cabin zone(s):
-- CABIN BRT to set the cabin zone lights to 100% visual brightness.
-- CABIN DIM 1 to dim the cabin zone lights to 50% visual brightness.
-- CABIN DIM 2 to dim the cabin zone lights to 10% visual brightness.
The LED on the "active" pushbutton illuminates.
To switch OFF the cabin zone lights, push the active (illuminated) pushbutton a
second time.
To switch ON the cabin zone lights again, push one of the pushbuttons CABIN,
DIM 1 or DIM 2. The cabin zone lights illuminate with the corresponding
brightness.
Note: Only the FAP provides the possibility to switch OFF all cabin zone lights.
TR1 A318/A319/A320/A321 FLEET CCOM Page 9 of 23
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
CABIN LIGHTING SYSTEM
02.070
OCT 27/07
LAVATORY LIGHTING
ALL
Each lavatory is equipped with different lighting units, controlled by the lavatory
lighting system.
STANDARD TYPE LAVATORY
STANDARD TYPE LAVATORY
EXAMPLE
BALLAST UNITS WITH
FLUORESCENT TUBES
MIRROR/AUXILIARY LIGHT
NOC 02070 01863 0001
The lavatory lighting system has following elements:
TR1 A318/A319/A320/A321 FLEET CCOM Page 10 of 23
CABIN CREW OPERATING MANUAL
CABIN INTERIOR
CABIN LIGHTING SYSTEM
02.070
OCT 27/07
-- Two ballast units with fluorescent tubes (located above the lavatory door)
-- One combined halogen mirror / auxiliary light (located beside the mirror)
SYSTEM OPERATION
The lavatory lighting system is controlled by the CIDS.
A micro-switch in the lavatory door-frame monitores, if the door is UNLOCKED or
LOCKED. Depending to these positions, the lavatory lighting system works in
different ways.
When the lavatory door is UNLOCKED:
-- The fluorescent tubes illuminate with reduced intensity,
-- The auxiliary light is on,
-- The mirror light is off.
When the lavatory door is LOCKED:
-- The fluorescent tubes illuminate with full intensity,
-- The auxiliary light stays on,
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:A320_Generic_Training_CCOM 上(16)