曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
selected approach/runway shows and the EXEC light comes on.
Line 6R shows the ROUTE prompt. This selects the ROUTE
page.
FMCS - DISPLAYS - CDU - DEP/ARR INDEX PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.30
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-036
FMCS - DISPLAYS - CDU - DEP/ARR INDEX PAGE
FMCS - DISPLAYS - CDU - DEP/ARR INDEX PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.31
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-036
General
The LEGS page is used by the flight crew to enter and review
data for each leg of the active route.
Page Access
This page may be accessed from any of these pages:
* RTE DATA
* SELECT DESIRED WPT page.
Legs Page Information
Line select key 1L shows the active waypoint in the flight plan.
The computed course to the active waypoint is shown above the
identifier as well as the distance to go (DTG) to the active
waypoint. Speed and altitude at the waypoint are also shown.
Line select keys 2L through 5L show subsequent waypoints in
the active flight plan with this data:
* Computed course to waypoint
* Computed leg length
* Speed and altitude.
NOTE: If the leg is a great circle track, the computed course to
the next waypoint will be shown. If the leg is a constant
heading leg, the computed course will be shown with
the suffix HDG.
Line select key 6L shows these prompts:
* ERASE (shows when data is being modified)
* LOAD (shows when data may be uplinked via an ACARS
message)
* RNP/ACTUAL (required navigation performance/actual
navigation performance).
Line select key 6R shows these prompts:
* RTE DATA (selects the RTE DATA page)
* ACTIVATE (shown before the route has been activated and
executed by the flight crew)
* MAP CTR STEP.
The MAP CTR STEP function is enabled when the PLAN mode
has been selected on the EFIS control panel. It lets the flight
crew step through the active flight plan and review the data for
each waypoint. The selected waypoint will be shown in the
center of the navigation display. The <CTR> prompt shows
the selected waypoint on the LEGS page.
FMCS - DISPLAYS - CDU - LEGS PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.32
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-073
FMCS - DISPLAYS - CDU - LEGS PAGE
FMCS - DISPLAYS - CDU - LEGS PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.33
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-073
General
The performance initialization pages let you initialize the FMCS
for performance calculations. The data may be entered by the
flight crew or uplinked with an ACARS message.
Page Access
Access to this page is from any one of these pages:
* ROUTE
* TAKEOFF REF
* INIT/REF INDEX
* INIT/REF mode key (if ADIRUs are aligned and the airplane
is on the ground).
Performance Initialization Page
Line 1L shows the GW/CRZ CG prompt. This lets the flight crew
enter the airplane gross weight.
If zero fuel weight (LSK 3L) was entered first, the calculated
gross weight will show here automatically.
Line 2L shows the PLAN/FUEL prompt. Total fuel weight from
the fuel quantity indicating system (FQIS) shows. If a fuel value
is set for PLAN fuel, this value is used in place of the total fuel
weight from the FQIS for the calculation of gross weight. This
allows performance calculations during airplane refueling. The
PLAN display will be blank at engine start, at entry of a new
gross weight, or when the airplane is in the air.
Line 3L shows the ZFW prompt. This lets the flight crew enter
the airplane zero fuel weight.
If gross weight (LSK 1L) was entered first, the calculated zero
fuel weight will show automatically.
Line 4L shows the RESERVES prompt. This lets the flight crew
enter the reserve fuel weight.
Line 5L shows the COST INDEX prompt. The default value for
this data field is box prompts. The range of values is 0-200.
Line 6L shows one of these prompts:
* INDEX (selects the INIT/REF INDEX page)
* LOAD (shows when data may be uplinked with an ACARS
message)
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737NGAMM3(134)
