曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
blank if the FMC finds a parity error for the airframe/engine
program pins or a valid performance data base is not loaded
into the FMC. It is also blank if the loaded performance data
base does not contain data for the current airframe/engine
program pin configuration.
Lines 2R and 3R show the effective dates of the active and
inactive navigation data bases. You can exchange the data on
these two lines to activate a new data base or recall the old one.
The exchange can only be done when the airplane is on the
ground. The active data base is compared to the FMC clock
input at initial power-up and if the active data base is out of date,
the CDU message NAV DATA OUT OF DATE shows in the
scratchpad.
Line 5R shows there is supplemental data and gives the
effective date of that data. The line is blank if an effective date is
not set or there is no supplemental data.
FMCS - DISPLAYS - CDU - IDENT PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.13
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-032
Line 6R shows the POS INIT prompt. This selects the POS INIT
page.
Page 2 Information
Line 1L shows the identification number of the performance
default data base in the FMC operational flight program.
Line 2L shows the identification number of the software options
data base.
Line 3L shows the identification number of the QRH T/O speeds
data base.
Line 4L shows the identification number of the ACARS datalink
configuration file.
Line 5L shows the identification number of the model/engine
performance data base. This line is blank if the data base is not
loaded.
Line 6L shows the INDEX prompt. This selects the INIT/REF
page.
Line 6R shows the POS INIT prompt. This selects the POS INIT
page.
FMCS - DISPLAYS - CDU - IDENT PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.14
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-032
FMCS - DISPLAYS - CDU - IDENT PAGE
FMCS - DISPLAYS - CDU - IDENT PAGE
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.15
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-032
THIS PAGE IS INTENTIONALLY LEFT BLANK
FMCS - DISPLAYS - CDU - IDENT PAGE
34-61-00
Page 98.16
D633A101-SHZ1 Oct 10/2002
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
Purpose
The INIT/REF INDEX page shows a menu of pages you can use
to initialize the following:
* FMCS
* ADIRU
* Other reference data.
Also, you can use this page to go to the FMCS MAINT BITE
INDEX page.
Page Access
To select this page, push line select key 6L on pages that show
the index prompt and are not BITE pages. The INDEX prompt on
BITE pages changes the display back to the last menu.
Information
Line select key 1L (LSK) shows the first page of the
configuration identification IDENT pages. These pages show
the FMCS data base and program configuration data.
LSK 2L shows the first page of the position initialization (POS)
pages. These pages are for ADIRS initialization and to show
navigation sensor positions.
LSK 3L shows the first page of the performance initialization
(PERF) pages. These pages are to enter the airplane
parameters that the FMC needs for VNAV calculations.
LSK 4L shows the first page of the TAKEOFF pages. These
pages are to select takeoff thrusts and speeds.
LSK 5L shows the approach reference (APPROACH) page. This
page gives specific information on the condition of the airplane
and the selected runway and approach procedures of the flight
plan.
LSK 6L shows the OFFSET page. This page is to start and end
an offset to the flight plan route.
LSK 1R shows the navigation data reference (NAV DATA) page.
This page is to enter this data into the temporary navigation
data base:
* Waypoints
* Navaids
* Airports.
LSK 3R shows the alternate destination (ALTN DEST) page. This
page is used to find this data for a specified alternate
destination:
* Distance
* Time
* Fuel remaining.
LSK 4R shows the ACARS page. This page is customer defined
and shows prompts to uplink/downlink FMC data.
FMCS - DISPLAYS - CDU - INIT/REF INDEX PAGE
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737NGAMM3(130)
