曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
* Airplane initial position
* Route structure
* Performance data.
The flight crew uses the line select keys (LSK) and function keys
to enter and verify data on these pages:
* IDENT
* POS INIT
* RTE
* DEP/ARR INDEX
* PERF INIT
* N1 LIMIT
* TAKEOFF REF.
IDENT Page
This page lets the flight crew verify the FMCS operational flight
program and data base identification numbers.
POS INIT Page
This page lets the flight crew set the reference airplane initial
position. This data is necessary to start ADIRU alignment.
Access to the POS REF and POS SHIFT pages is from this page.
RTE Page
This page lets the flight crew make a flight plan or set a
company route from the navigation data base. If the entered
route or company route does not have an origin departure or
destination approach the crew must also select a departure
runway and arrival data.
DEP/ARR INDEX Page
This page lets the flight crew select the departure runway and
standard instrument departure (SID) data. The standard
terminal arrival route (STAR), approach, and destination
runway can also be selected on this page.
PERF INIT Page
This page lets the flight crew enter aircraft and atmospheric
parameters necessary for the FMCS to calculate the vertical
flight profile performance data.
FMCS - DISPLAYS - CDU - PRE-FLIGHT INTRODUCTION
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.9
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-031
N1 LIMIT Page
This page lets the flight crew select the engine thrust limits for
display by the N1 limit bugs on the engine indication and for use
by the autothrottle. Outside air temperature is also selected
from this page.
TAKEOFF REF Page
This page lets the flight crew select the takeoff flaps setting and
takeoff V speed values.
CAUTION: ANY FMC ENTRIES MADE ON NON-BITE PAGES
SHOULD BE REMOVED AT THE COMPLETION OF
MAINTENANCE ACTIVITIES. THIS PREVENTS
MAINTENANCE ACTIVITIES FROM HAVING AN
UNINTENTIONAL IMPACT ON FMC FLIGHT
OPERATIONS. FMC ENTRIES MAY BE REMOVED
BY USING THE DELETE KEY OR BY TURNING OFF
POWER TO THE FMC FOR AT LEAST TEN
SECONDS.
FMCS - DISPLAYS - CDU - PRE-FLIGHT INTRODUCTION
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.10
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-031
FMCS - DISPLAYS - CDU - PRE-FLIGHT INTRODUCTION
FMCS - DISPLAYS - CDU - PRE-FLIGHT INTRODUCTION
EFFECTIVITY
SHZ ALL 34-61-00
Page 98.11
D633A101-SHZ1 Jun 10/2003
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
34-61-00-031
THIS PAGE IS INTENTIONALLY LEFT BLANK
FMCS - DISPLAYS - CDU - PRE-FLIGHT INTRODUCTION
34-61-00
Page 98.12
D633A101-SHZ1 Oct 10/2002
BOEING PROPRIETARY - Copyright#- Unpublished Work - See title page for details.
737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL
Purpose
The IDENT page lets the crew verify the FMCS operational flight
program and data base identification numbers. Also, you can
select the POS INIT and INDEX pages from the IDENT page.
Page Access
The IDENT page is the first page that shows on the MCDU when
you select the FMC prompt on the MENU page. It can also be
selected from the INIT/REF INDEX page.
Page 1 Information
Line 1L shows the airplane model. The airframe/engine
program pin configuration sets this information. This line is
blank if the FMC finds a parity error for the airframe/engine
program pins or a valid performance data base is not loaded
into the FMC. It is also blank if the loaded performance data
base does not contain data for the current airframe/engine
program pin configuration.
Line 2L shows the navigation data base identification number
loaded in the FMC. This data field is blank if a navigation data
base is not loaded.
Line 4L shows the FMC operational program software part
number and the update version.
Line 5L can show the Smiths Industries operational program
software part number. To show the number, enter the word
SIPART into the scratch pad and select key 5L. This line is blank
when the part number is not shown.
Line 6L shows the INDEX prompt. This selects the INIT/REF
page.
Line 1R shows the engine thrust rating. This information is set
by the airframe/engine program pin configuration. This line is
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
737NGAMM3(129)
