• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-11-17 18:08来源:蓝天飞行翻译 作者:航空

To view this page ensure that Adobe Flash Player version 9.0.124 or greater is installed.

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

3) On-Engine Sensors (oil pressure, oil tempature (FADEC TRD)): 28 volts DC, 0.2 amps.
Test Equipment
Tool No. Description
NA Test Adapter
NA Cowling Kit
9457M50G02 Bellmouth pressure (P10) probe (Alt. PN 856A1158G04)
856A3796G03 Cover Kit, Blank-off (blank-off covers)
856A1834 Fan discharge pressure (PT17) rake
856A1462 Sensor, Temperature - T54
856A1463 Sensor, Pressure - PT54
Optional Test Equipment
856A2807 Test Cell Connector G44, G45 and/or G46 (FMN1 plug) as required if testing additional engine ratings
3505945-1 1 * Air Starter, Garrett Fluid Systems, Model ATS100-511, Starter Adapter, Starter Marmon Clamp
* Engines may be tested with a slave starter and a slave starter valve, however it is preferable to use the production starter which is shipped with the engine.
General - 72-00-00-13-000
2011-4-9 CFMI PROPRIETARY INFORMATION : Subject to the restrictions on the Page 2 5
Training Material
CFM56-7B Engine Testing
ENGINE ADAPTER AND
MOUNT BEAM AND
INTEGRAL PYLON
FAIRINGS
COWLING KIT
The Engine Test Kit consists of:
Engine Test Adapter
Engine Control Software
Engine Application Software
Engine Test Adapter Storage Cart (Optional)
Airframe Specific Adaptation Hardware
Engine Cowling Kit Components & Storage Dollies
Engine Test Tooling (856A tools)
Adapter includes:
Load Attenuation Devices
Air Start Tube
Engine Service Panels
Adapter coupling plate configured to mate with test cell Thrust Frame
Fuel Hose Assembly
Fire Protection
Temperature Measurement Connections
N1 Trim Balance Connector
Test Instrumentation Pressure and Drain Hoses
Engine Buildup (EBU) Hardware:
Front Mount Assembly Kit
Aft Mount Assembly Kit
Thrust Link Assemblies
Starter Control Valve with duct to starter
Bare engine fuel hose and adapter
Bare engine air start duct and clamps
2011-4-9 CFMI PROPRIETARY INFORMATION : Subject to the restrictions on the Page 2 6
Training Material
CFM56-7B Engine Testing
Test Tooling, Instrumentation, and Drain Connections Requirements
NOTE: You can use equivalent alternatives
Tool No. Description
856A1084G04 Cart, Stator Actuator (actuator cart)
856A1310G01 Kit, Borescope Guide - HP Turbine (borescope guide kit)
856A1320P07 Borescope Set, Rigid (or P04, P05, P06)
856A1321P06 Fiberscope Set
856A1322P09 Borescope - Lightsource Set
856A1351P01 Guide Tube, Borescope - HP Turbine Shroud
856A1815G02 Motor, Drive - Core Engine Rotation (Foot operated drive motor)
856A1364G02 Print Set, Assy Identification - Magnetic Chip Detector
MSE-75C Portable Data Loader
856A1616G02 Cable, Assembly (to be used with Portable data loader)
COM-2464 Adapter - Drain, CFM56-7 Engine (Part #: DB-75)
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:CFM56-7B ENGINE TEST TRAINING MANUAL 发动机测试培训手册(2)