• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-26 22:25来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 

AIMS -MISCELLANEOUS RACKS COMPONENT LOCATIONS

EFFECTIVITY BEJ ALL  31-41-00 
Page 21 
D633W101-BEJ  Jan 05/2002 


AIMS -AIMS CABINET COMPONENT LOCATIONS

AIMS Component Locations
An AIMS cabinet includes eight LRMs and an AIMS cabinet chassis. The left AIMS cabinet components are:
*
Cabinet chassis

*
Core processor module/communication (CPM/Comm)

*
CPM/airplane condition monitoring function (CPM/ACMF)

*
CPM/graphics generator (CPM/GG) (2)

*
Input/output module (IOM) (4).


The right AIMS cabinet components are the same except there is a CPM/Basic in place of a CPM/ACMF.
EFFECTIVITY BEJ ALL  31-41-00 
Page 22 
D633W101-BEJ  Sep 05/2002 

 

777 AIRCRAFT MAINTENANCE MANUAL


AIMS -AIMS CABINET COMPONENT LOCATIONS

EFFECTIVITY BEJ ALL  31-41-00 
Page 23 
D633W101-BEJ  Jan 05/2002 


AIMS -INPUT POWER INTERFACES

General
Each AIMS cabinet receives power through four circuit breakers in the overhead circuit breaker panel. Each AIMS cabinet also receives power through one hot battery bus circuit breaker in the standby power management panel.
The left AIMS cabinet gets electrical power from the 28v dc capt flight instrument bus, the 28v dc F/O flight instrument bus, and the hot battery bus. The right AIMS cabinet gets electrical power from the 28v dc left bus, the 28v dc right bus, and the hot battery bus.
The electrical power goes through a power filter on the back of the AIMS cabinet and then goes to the backplane power bus. The backplane power bus supplies power to the eight LRMs in the cabinet.
EFFECTIVITY BEJ ALL  31-41-00 
Page 24 
D633W101-BEJ  Sep 05/2002 

 

777 AIRCRAFT MAINTENANCE MANUAL


AIMS -INPUT POWER INTERFACES

EFFECTIVITY BEJ ALL  31-41-00 
Page 25 
D633W101-BEJ  Jan 05/2002 


AIMS -CONFIGURATION PIN INTERFACES

Configuration Pins
The left and right AIMS cabinets have program pins that set the configuration of the:
*
Cabinet position

*
Engine manufacturer

*
Airframe type

*
Wingfold configuration

*
Parity for the program pins.


The parity pin is grounded when an even number of program pins are grounded.
EFFECTIVITY BEJ ALL  31-41-00 
Page 26 
D633W101-BEJ  Sep 05/2002 

 

777 AIRCRAFT MAINTENANCE MANUAL


AIMS -CONFIGURATION PIN INTERFACES

EFFECTIVITY BEJ ALL  31-41-00 
Page 27 
D633W101-BEJ  Jan 05/2002 

 

777 AIRCRAFT MAINTENANCE MANUAL

THIS PAGE IS INTENTIONALLY LEFT BLANK

31-41-00

Page 28 D633W101-BEJ Jan 05/2002

AIMS -FLIGHT CONTROLS ARINC 629 BUSES INTERFACES

General
The AIMS cabinets receive data on all three of the flight controls ARINC 629 buses and transmit data on the left and right buses. The AIMS cabinets also transmit data on the center flight controls ARINC 629 bus when the airplane is on the ground. The AIMS cabinets transmit data loading information and maintenance data on the center flight controls ARINC 629 bus.
The LRUs that have an interface with the AIMS cabinets on the flight controls ARINC 629 buses are the:
*
Air data inertial reference unit (ADIRU)

*
Secondary attitude air data reference unit (SAARU)

*
Air data module (ADM), static (3)

*
Air data module (ADM), pitot (3)

*
Primary flight computer (PFC) (3)

*
Actuator control electronics (ACE) (4)

*
Flight control power supply assembly (FCPSA) (3).


The control display units (CDUs) and the autopilot flight director computers (AFDCs) connect to the flight controls ARINC 629 buses. However, the CDUs and AFDCs do not communicate with the AIMS cabinets on the flight controls ARINC 629 buses.
ADIRU
The AIMS cabinets receive inertial reference data and air data from the ADIRU on the left and right flight controls ARINC 629 buses. The AIMS cabinets transmit data to the ADIRU on the left and right flight controls ARINC 629 buses.
EFFECTIVITY
BEJ ALL

SAARU
The AIMS cabinets receive inertial reference data and air data from the SAARU on the center flight controls ARINC 629 bus. The AIMS cabinets transmit data to the SAARU on the left and right flight controls ARINC 629 buses.
ADM
The AIMS cabinets receive static pressure and total pressure data from the six ADMs on the three flight controls ARINC 629 data buses. The AIMS cabinets transmit data to the six ADMs on the left and right flight controls ARINC 629 data buses.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:777 AMM 飞机维护手册 指示和记录系统 1(25)