*
If applicable, left, center or right position
*
Parameter value
*
Engineering units of measure.
The mnemonic data page has command buttons at the bottom of the display.
Search Parameter
To show a parameter, select SEARCH PARAMETER and the parameter search dialog box shows.
Delete Parameter
To delete a parameter, select the parameter then select DELETE PARAMETER.
Start and Stop
Select START and the mnemonic data page updates the parameters at a 1Hz rate. Select STOP and the parameters do not update.
Clear List
Select CLEAR LIST and the mnemonic list on the mnemonic data page goes away.
Print
The PRINT selection causes the list to go to the printer.
EFFECTIVITY BEJ ALL 31-35-00
Page 34
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
ACMS -OPERATION -MNEMONICS
EFFECTIVITY BEJ ALL 31-35-00
Page 35
D633W101-BEJ May 05/2002
ACMS -OPERATION -SIGNAL SOURCE DIALOG BOX
General
The mnemonic data page uses the parameter search dialog box. The parameter search dialog box finds any signal in the ACMS database. You enter a signal name in the SIGNAL NAME field and/or enter an LRU in the SOURCE field. You can use an asterisk (*) as a wild card in the SIGNAL NAME field.
Select FIND SIGNAL to show a list of signals in the dialog box window.
Select the desired signal from the list and then select ADD SIGNAL.
Select DONE to close the parameter search dialog box. The selected signal then shows on the mnemonic data page.
Select ABORT SEARCH to stop a search.
The programmable report specification page also uses this dialog box.
EFFECTIVITY BEJ ALL 31-35-00
Page 36
D633W101-BEJ Sep 05/2002
ACMS -OPERATION -SIGNAL SOURCE DIALOG BOX
EFFECTIVITY BEJ ALL 31-35-00
Page 37
D633W101-BEJ Jan 05/2002
ACMS -OPERATION -MODIFIABLE CONSTANTS
General * Time of change
* Date of change. The modifiable constants function lets you change a constant with the MAT rather than with the GBST.
The modifiable constants show on the modifiable constants page. Scroll through the display to view all the modifiable constants.
For each modifiable constant, the page shows this information:
*
Name
*
Default value
*
Current value.
Two command buttons show at the bottom of the display.
Modify Constant
To change a modifiable constant, select MODIFY CONSTANT and the modify value dialog box shows.
Print
Select PRINT, and a minimum of the last twenty modified constants show on the report. The printout contains these fields:
*
Modified constant name
*
Previous value
*
New value
*
Default value
EFFECTIVITY BEJ ALL 31-35-00
Page 38
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
ACMS -OPERATION -MODIFIABLE CONSTANTS
EFFECTIVITY BEJ ALL 31-35-00
Page 39
D633W101-BEJ Jan 05/2002
ACMS -OPERATION -MODIFY VALUE DIALOG BOX
General
The modifiable constants page uses the modify value dialog box. The modify value dialog box lets you enter a new value in the value field. Select ACCEPT to return to the modifiable constants page. The new value then shows on the modifiable constants page.
To change the enable or disable state of a modifiable constant, such as a report, use the MAT keyboard to enter a 1 for enable, or a 0 for disable. Select ACCEPT to return to the modifiable constants page. The new state then shows on the modifiable constants page.
The programmable reports specification page also uses this dialog box.
EFFECTIVITY BEJ ALL 31-35-00
Page 40
D633W101-BEJ Sep 05/2002
777 AIRCRAFT MAINTENANCE MANUAL
ACMS -OPERATION -MODIFY VALUE DIALOG BOX
EFFECTIVITY BEJ ALL 31-35-00
Page 41
D633W101-BEJ May 05/2002
ACMS -OPERATION -PROGRAMMABLE REPORT -SPECIFICATION
General
The ACMS menu has three programmable report menu items. The programmable reports let you create a limited logic unit and record airplane parameters onboard the airplane. Each programmable report menu item cascades into two selections, SPECIFICATION or RESULT. Select SPECIFICATION to see the report specification page. Select RESULT to see the report results page.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：777 AMM 飞机维护手册 指示和记录系统 1(18)
