(b)
Make sure the CARGO FWD 1 and CARGO AFT 1 squib test lights stay off.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-23-02
ALL ú ú 07 Page 414 ú Sep 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 864-089
(11) Release the TEST switch.
(a) Make sure the CARGO FWD 2 and CARGO AFT 2 squib test lights go off.
S 864-091
(12) Remove the DO-NOT-CLOSE tag and close this circuit breaker on the P6 panel:
(a) 6H5, FIRE EXTINGUISHING CARGO BTL 1
J. Do a Test of the Fire Extinguisher Bottle Installation.
S 744-094
(1) Push the TEST switch on the SQUIB TEST Control Panel on the right side panel, P61.
(a) Make sure the green CARGO FWD 1 and 2, and CARGO AFT 1 and 2 squib test lights come on.
S 444-109
(2)
Push the forward end-line pressure switch reset button, S633, if the cargo fire extinguisher bottle 1 had been discharged into the FWD compartment.
S 444-150
(3)
AIRPLANES WITH METERED CARGO FIRE EXTINGUISHER SYSTEM; Push the aft discharge line pressure switch reset button, S10565, if the cargo fire extinguisher bottle 2 had been discharged into the AFT compartment.
S 444-110
(4)
Push and hold the pressure switch manual-override button on the fire extinguisher bottle 1 or 2 (as applicable).
(a) Make sure the yellow DISCH light in the BTL DISCH 1 or 2 switch (as applicable) on the APU/CARGO Fire Control Panel, P8, comes on.
S 864-111
(5)
Release the pressure switch manual-override button on the fire extinguisher bottle 1 or 2 (as applicable).
(a) Make sure the DISCH light on the APU/CARGO FIRE Control Panel, P8, goes off.
(6)
Remove electrical power if it is not necessary (Ref 24-22-00).
S 864-112
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-23-02
ALL ú ú 11 Page 415 ú Sep 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
REGULATOR - REMOVAL/INSTALLATION
________________________________
1. General_______
A. The regulator is installed near the cargo fire extinguisher bottles, forward area of the aft cargo compartment forward endliner panel.
B. After the cargo fire extinguishing bottles are discharged, you must replace the fire extinguishing bottles, the squibs, and the applicable filter and regulator.
TASK 26-23-03-004-001
2. Remove the Regulator (Fig. 401)____________________
A. Access
(1) Location Zones
153 Aft Cargo Compartment (Left)
154 Aft Cargo Compartment (Right)
B. Procedure
S 864-002
(1) Open these circuit breakers on the main power distribution panel, P6, and attach a DO-NOT-CLOSE tags:
(a)
6H1, FIRE EXT BTL 1 ENG L
(b)
6H5, FIRE EXTINGUISHING CARGO BTL 1
(c)
6H6, FIRE EXTINGUISHING CARGO BTL 2
S 014-003
(2)
Get access to the regulator.
S 034-004
(3)
Loosen the connectors to disconnect the tubing from the regulator.
(4)
Loosen the jam nut.
S 034-006
(5)
Remove the two bolts and washers which connect the top support bracket to the regulator.
S 034-007
(6)
Remove the two bolts, nuts, and washers which connect the bottom support bracket to the regulator.
(7)
Remove the regulator from the bottom U-shaped support bracket.
S 034-005
S 024-008
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH METERED CARGO FIRE ú
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 防火 FIRE PROTECTION 2(107)
