20-10-09
ALL ú
ú 01 Page 844
ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21652
A
757 MAINTENANCE MANUAL
NOTE: REFER TO FIG. 824 TO MAKE AN ORDER FOR PARTS. STANDARD CADMIUM-PLATED SLEEVE BACS13AP (SIZE)
STANDARD CADMIUM-PLATED SLEEVE:
. BACS13BX (SIZE) HP
BACS13BD20H.HP AND BACS13BD24H.HP HAVE BEEN SUPERSEDED BY BAC13BX20H.HP AND BAC13BX24H.HP.
THE BACSBBX SLEEVE CAN BE USED TO REPAIR SIZE 20 AND 24 ALUMINUM TUBES WITH SHORT FLARELESS FITTINGS. IT CAN ALSO BE USED TO REPAIR SIZE 20 ALUMINUM TUBES AND SIZE 20 AND 24 CRES TUBES WITH STANDARD FLARELESS FITTINGS. MAKE SURE YOU DETERMINE THE APPLICATION BEFORE SWAGGING. SHORT FLARELESS FITTINGS REQUIRE A SHORTER "Z " DIMENSION (FIG. 811).
1
DO NOT USE ALUMINUM NUTS OR UNIONS ON TUBE MATERIALS OTHER THAN ALUMINUM.
ASSOCIATED APPROVED FITTINGS FOR OTHER UNIONS, REDUCERS, ELBOWS, AND TEES WITH MS33514 OR MS33515 FITTING ENDS; AND FOR SHORT FLARELESS FITTING APPLICATIONS, OTHER UNIONS, REDUCERS, ELBOWS AND TEES WITH AS4658 OR AS4659 FITTING ENDS.
USE ONLY THE CRYOLIVE FLARELESS SLEEVE ASSEMBLY, CONSISTING OF THE CRYOLIVE SLEEVE, COUPLING NUT AND PLASTIC CAP. THE CRYOLIVE FLARELESS SLEEVE ASSEMBLY, IN SIZES 10, 12 AND 16, REQUIRES USE OF A LONGER LENGTH AMCI P/N 9211699 (MATERIAL CODE)(SIZE) N COUPLING NUT. THE LONGER LENGTH COUPLING NUTS ARE NOT INTERCHANGEABLE WITH STANDARD BACN10- AND MS21921 COUPLING NUTS.
WHEN PERFORMING A HYDRAULIC TUBE REPAIR WITH THE SAME TUBE MATERIAL, THE ALTERNATE TUBE WALL THICKNESSES LISTED IN FIG. 802 (SHEET 6) MAY BE USED IN PLACE OF WALL THICKNESSES DELIVERED WITH THE AIRPLANE WHEN PERFORMING A REPAIR ON TUBES IN SYSTEMS WITH 3000 PSI OR LESS OPERATING PRESSURE.
Tube Material and Fitting Selection Tables
Figure 802 (Sheet 8)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-09
ALL ú ú 01 Page 845 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21653
A
757
MAINTENANCE MANUAL
ALL DIMENSIONS ARE IN INCHES.
NOTE: THE ABOVE LIMITS WERE VERIFIED BY HYDRAULIC IMPULSE FATIGUE AND BURST TESTING (FOR ADDITIONAL INFORMATION SEE SAE-AIR 1388).
Permitted Tube Problem Depth -Hydraulic Pressure (3000 PSI), Return Lines (1500 PSI), and Fire Extinguishing Pressure (1000 PSI) Figure 803
L21655
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-09
ALL ú ú 01 Page 846 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
CUTTER TOOL
TUBE SIZE 04 D9872 PART NUMBER CHIPLESS CUTTER D9872-114 PART NUMBER CUTTER WHEEL
06 D9872 D9872-114
08 D9853 D9853-214
10 D9853 D9853-214
12 D9853 D9853-214
DEUTSCH CHIPLESS CUTTERS AND CUTTER WHEELS
TABLE A
Deutsch Tools
Figure 804 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-10-09
ALL ú ú 01 Page 847 ú May 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L21656
A
757
MAINTENANCE MANUAL
04 TUBE SIZE 0.016-0.028 THICKESS (INCHES) TUBE WALL D9851-13-04 PART NUMBER STEM SUBASSEMBLY D9851 PART NUMBER DEBURRING TOOL
04 0.028-0.050 D9851-13-03 D9851
06 0.016-0.035 D9851-13-06 D9851
06 0.035-0.058 D9851-13-07 D9851
08 0.016-0.042 D9850-13-08 D9850
10 0.016-0.058 D9850-13-10 D9850
12 0.016-0.058 D9850-13-12 D9850
16 0.016-0.058 D9849-13-16 D9849
20 0.016-0.058 D9849-13-20 D9849
DEUTSCH STEM SUBASSEMBLIES, DEBURRING TOOLS, AND
REQUIRED CHAMFER DIMENSIONS
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 STANDARD PRACTICES - AIRFRAME(41)
