747-400 AMM 飞机维护手册机身 FUSELAGE(32)_航空信息_民用航空_通用航空

曝光台注意防骗网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

_______ ALODINE WILL CAUSE A STAIN ON FABRICS.
(2)
Do this task to apply the clear alodine to the surfaces of the passenger seat tracks and main deck floor tracks: "Apply Alodine 1000 Solution" (Ref 51-21-04/701).

S 377-008

(3)
Apply the aluminized primer to the surfaces of the passenger seat tracks and main deck floor tracks.

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

53-42-01
ALL ú ú 03 Page 702 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

SEAT TRACK

IN THESE AREAS
Seat Track Painting
Figure 701

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

53-42-01
ALL ú ú 01 Page 703 ú Jun 10/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
FUSELAGE ATTACH FITTINGS - DESCRIPTION AND OPERATION
____________________________________________________
1. General_______
A. Fuselage attach fittings are primary or secondary structure, depending on their function. Locations vary from the nose radome attachments at the forward bulkhead to the APU mounts in section 48.
2. Attach Fittings_______________
A. Hinge fittings and eyebolt latch fittings, for the nose radome are attached to the station 134 bulkhead.
B. Latch fittings and stop fittings are provided for each of the external electrical/electronic equipment access doors, plus hinge fittings at the aft door location.
C. Hinge fittings, guide plates, stop fittings, and latches are attached to the structure surrounding each entry door, plus the body torque tube attachments and the emergency opening mechanism.
D. Hinges (piano type), hook pin fittings, latch pin fittings, centering guide fittings and actuator fittings attach to the structure surrounding the forward and aft cargo doors.
E. The attach fittings surrounding the bulk cargo door are the hinge fittings, centering plates, stop fittings and latch fittings.
F. Fittings attach the nose gear and main gear doors and their actuators.
G. Wing-to-body splice/attach fittings combine with the four bulkheads as the prime attach fittings in that area.
H. Hinge fittings and jackscrew fittings are attachments for the horizontal stabilizer.
I. Fittings at bulkheads and between bulkheads provide attachment for the vertical fin.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

53-43-00
ALL ú ú 01 Page 1 ú Jun 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
FUSELAGE ATTACH FITTINGS - MAINTENANCE PRACTICES
________________________________________________
1. General
_______
A. This procedure has one task. This task gives instructions for a visual inspection of the attach fittings.
B. The location and the function of the attach fittings are different.
C. The condition of the attach fittings must be satisfactory. You must remove or repair the attach fittings that are damaged or have corrosion.
TASK 53-43-00-202-001
2. Fuselage Attach Fittings-Inspection
___________________________________
A. References
(1)
51-21-03/701, Corrosion (Removal and Control)