4. Procedure
_________
Subtask 31-51-00-610-050
A. Access to the ECAM OEB DATABASE UPDATE Menu
NOTE : The procedure below is applicable to each MCDU. The actions and
____
results of this procedure occur on the MCDU used.
NOTE : If the response time of the FWCs is more than 1 second a IN
____
PROGRESS message comes into view.
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1. Access to the ECAM OEB DATABASE UPDATE menu
A. On one of the MCDUs , turn the The MCDU is on.
OFF/BRT knob
B. Push the MCDU MENU mode key The MCDU MENU page comes into view.
C. Push the line key adjacent to The SYSTEM REPORT/TEST menu page comes the SYSTEM REPORT/TEST into view. indication.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-51-00Page 302 1 1 Aug 01/05 1 1 1CES 1
-------------------------------------------------------------------------------
ACTION RESULT -------------------------------------------------------------------------------
D. Push the line key adjacent to The instruments menu page comes into the INST indication. view.
E. Push the line key adjacent to The ECAM first page comes into view. the ECAM indication.
NOTE : For FWC1 database updating enter in the ECAM 1 menu. For the FWC2
____
database enter in the ECAM 2 menu.
F. Push the line key adjacent to the OEB DATABASE indication. The ECAM 1 or 2 OEB DATABASE page comesinto view.
NOTE : If the data base of the FWC1 or____ FWC2 is not valid, the VERSION is replaced by XXX and the check sum is replaced by XXXXX adjacent to the FWC1 or FWC2 indication.
NOTE : If the opposite FWC does not____ respond, the NO RESPONSE message comes into view adjacent to the FWC1 or 2 indication.
2. UPDATE CODE
NOTE : The loading of the FWC data base is possible only if the UPDATE CODE
____ is entered.
A. With the MCDU keyboard, enter The code TWIN comes into view in the
the TWIN code. scratchpad line.
B. Push the line key adjacent to If the code is valid, the ECAM 1 or 2
the UPDATE CODE indication. OEB DATABASE UPDATE page comes into
view.
NOTE : If the code is not valid, the____
INVALID DATA message comes into
view on the ECAM 1 or 2 OEB
DATABASE page.
R 1EFF : 106-149, 211-299, 301-399, 401-499, 1 31-51-00Page 303 1 1 Aug 01/05 1 1 1CES 1 Subtask 31-51-00-610-051
B. Loading of the OEB REMINDER Elements into the FWC 1or2.
NOTE : You can load the FWC data base only if the UPDATE CODE is entered
____
(Ref. step. 2.)
NOTE : You must load each OEB element manually through one MCDU.
____
Each OEB element consists in :
-Warning code : ATA (Chapter) / Sub ATA (Section) / Order number/ algorithmic key (Example : 21/31/221/053)
-
Impact on Warning (EFFECT ON WARN : YES or NO)
-
Impact on Status (EFFECT ON STS : YES or NO)
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
On the MCDU, push the line key The ECAM 1or2 OEB DATABASE UPDATE -adjacent to CREATE indication. CODE WARN STS page comes into view.
2.
With the MCDU keyboard, enter the The code (21/31/221/053) comes into warning code (Example : view in the scratchpad line. 21/31/221/053)
3.
Push the line key adjacent to the The code (21/31/221/053) comes into CODE indication view
NOTE : If the syntax is not correct,
____ the FORMAT ERROR message comes into view.
4. Below the EFFECT ON WARN The YES (or NO) indication comes into indication, push the line key view below the WARN indication. adjacent to the YES (or NO) indication.
NOTE : The line keys adjacent to YES or NO indication are inactive, if the
____
warning code has not been entered.
5. Below the EFFECT ON STS The NO (or YES) indication comes into
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320飞机维护手册 AMM 指示/记录系统 6(4)
