曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
If the APU is started on batteries only, it should be started within 30 min after the selection
of batteries to AUTO (35 min after battery selection to AUTO, the battery charge is less
than 25 % of maximum capacity).
If the aircraft has been electrically supplied during the last 6 h:
BAT 1 pb and BAT 2 pb....................................................................................................AUTO
EXT PWR pb (when AVAIL light is on)........................................................................................ ON
AVAIL light goes out.
HYD
WARNING Do not pressurize hydraulic systems without clearance from ground crew.
APU FIRE TEST/START
Applicable to: ALL
APU FIRE
APU FIRE pb-sw...................................................................................................IN and GUARDED
AGENT lights ............................................................................................................................. OUT
If the APU is already running, ensure that the following check has already been completed. If not,
perform it.
APU FIRE TEST pb................................................................................................................PRESS
Check :
APU FIRE warning on ECAM + CRC + MASTER WARN ‐ light (if AC Power available).
‐ APU FIRE pb-sw lighted red.
‐ SQUIB light and DISCH light on
Applicable to:
,
,
MSN,,,
APU START
If EXT PWR pb ON light is on:
APU MASTER SW pb-sw.......................................................................................................ON
ON light comes on.
APU SD page appears on ECAM.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
STANDARD OPERATING PROCEDURES
- PRELIMINARY COCKPIT PREPARATION
A318/A319/A320/A321 FLEET PRO-NOR-SOP-04 P 3/10
FCOM 19 AUG 10
APU START pb-sw................................................................................................................. ON
FLAP OPEN indication appears on APU SD page.
On APU SD page, N and EGT rise.
When N = 95 %:
‐ On APU SD page, AVAIL indication appears.
‐ On APU panel : START ON light goes out.
AVAIL light comes on.
10 s later:
‐ DOOR SD page replaces APU SD page.
EXT PWR pb............................................................................................................... AS RQRD
If EXT PWR pb ON light is out:
APU MASTER SW pb-sw.......................................................................................................ON
ON light comes on.
APU START pb-sw................................................................................................................. ON
At 95 % RPM:
‐ START ON light goes out.
‐ AVAIL light comes on.
‐ APU GEN comes on line.
‐ APU SD page appears after 10 s.
If required, adjust brightness on ECAM control panel.
10 s later:
‐ DOOR SD page replaces APU SD page.
Applicable to:
APU START
If the EXT PWR pb ON light is on:
APU MASTER SW pb-sw.......................................................................................................ON
ON light comes on.
APU SD page appears on ECAM.
APU START pb-sw................................................................................................................. ON
Note: Wait at least 5 s before selecting APU START pb-sw.
The FLAP OPEN indication appears on APU SD page.
On the APU SD page, N and EGT rise.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
PROCEDURES
NORMAL PROCEDURES
STANDARD OPERATING PROCEDURES
- PRELIMINARY COCKPIT PREPARATION
A318/A319/A320/A321 FLEET PRO-NOR-SOP-04 P 4/10
FCOM 19 AUG 10
When N = 95 %:
‐ On APU SD page, AVAIL indication appears.
‐ On APU panel : START ON light goes out.
AVAIL light comes on.
10 s later:
‐ DOOR SD page replaces APU SD page.
EXT PWR pb............................................................................................................... AS RQRD
If the EXT PWR pb ON light is off:
APU MASTER SW pb-sw.......................................................................................................ON
ON light comes on.
APU START pb-sw................................................................................................................. ON
Note: Wait at least 5 s before selecting APU START pb-sw.
At 95 % RPM:
‐ START ON light goes out.
‐ AVAIL light comes on.
‐ APU GEN comes on line.
‐ APU SD page appears after 10 s.
If required, adjust brightness on ECAM control panel.
10 s later:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 11(118)
