曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
is started.
‐ Two APs may be engaged at a time (AP1 active, AP2 in standby), when the localizer/glide-slope
or roll out or go-around mode is armed or engaged.
Only one AP can be engaged at a time in all other cases.
‐ If one AP pb is set to ON with both FDs OFF, the AP engages in HDG V/S or TRK FPA mode,
depending upon which mode the flight crew has selected on the FCU.
‐ If one AP pb is set to ON with at least one FD already ON, the AP engages in the current active
FD modes.
AP engagement increases the break out force on the sidestick controllers and on the rudder pedals.
AP engagement is indicated by the lighting of the corresponding FCU pushbutton and by the
appearance of AP1 (or 2) on the PFD’s FMA.
AP ENGAGEMENT
Applicable to:
The flight crew can engage AP1 or AP2 by pressing the corresponding pushbutton on the FCU if the
aircraft has been airborne for at least 5 s.
When one AP is engaged, the corresponding FCU pushbutton comes on and AP1 (or 2) is displayed
on the FMAs.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT GUIDANCE
AUTOPILOT (AP)
A318/A319/A320/A321 FLEET DSC-22_30-30 P 2/6
FCOM 19 AUG 10
‐ One AP can be engaged on ground if the engines are not running. It disengages when one engine
is started.
‐ Two APs may be engaged at a time (AP1 active, AP2 in standby), when the localizer/glide-slope
or roll out or go-around mode is armed or engaged.
Only one AP can be engaged at a time in all other cases.
‐ If one AP pb is set to ON with both FDs OFF, the AP engages in HDG V/S or TRK FPA mode,
depending upon which mode the flight crew has selected on the FCU.
‐ If one AP pb is set to ON with at least one FD already ON, the AP engages in the current active
FD modes.
‐ At takeoff, the AP cannot be engaged below 100 ft.
AP engagement increases the break out force on the sidestick controllers and on the rudder pedals.
AP engagement is indicated by the lighting of the corresponding FCU pushbutton and by the
appearance of AP1 (or 2) on the PFD’s FMA.
AP ENGAGEMENT
Applicable to:
The flight crew can engage AP1 or AP2 by pressing the corresponding pushbutton on the FCU if the
aircraft has been airborne for at least 5 s.
When one AP is engaged, the corresponding FCU pushbutton comes on and AP1 (or 2) is displayed
on the FMAs.
In dual BACK–UP NAV, AP can be engaged in selected modes if the FG part is available.
One AP can be engaged on ground if the engines are not running. ‐ It disengages when one engine
is started.
‐ Two APs may be engaged at a time (AP1 active, AP2 in standby), when the localizer/glide-slope
or roll out or go-around mode is armed or engaged.
Only one AP can be engaged at a time in all other cases.
‐ If one AP pb is set to ON with both FDs OFF, the AP engages in HDG V/S or TRK FPA mode,
depending upon which mode the flight crew has selected on the FCU.
‐ If one AP pb is set to ON with at least one FD already ON, the AP engages in the current active
FD modes.
AP engagement increases the break out force on the sidestick controllers and on the rudder pedals.
AP engagement is indicated by the lighting of the corresponding FCU pushbutton and by the
appearance of AP1 (or 2) on the PFD’s FMA.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT GUIDANCE
AUTOPILOT (AP)
A318/A319/A320/A321 FLEET DSC-22_30-30 P 3/6
FCOM 19 AUG 10
AP ENGAGEMENT
Applicable to:
,
,
MSN,,,
The flight crew can engage AP1 or AP2 by pressing the corresponding pushbutton on the FCU if the
aircraft has been airborne for at least 5 s.
When one AP is engaged, the corresponding FCU pushbutton comes on and AP1 (or 2) is displayed
on the FMAs.
In dual BACK–UP NAV, AP can be engaged in selected modes if the FG part is available.
‐ One AP can be engaged on ground if the engines are not running. It disengages when one engine
is started.
‐ Two APs may be engaged at a time (AP1 active, AP2 in standby), when the localizer/glide-slope
or roll out or go-around mode is armed or engaged.
Only one AP can be engaged at a time in all other cases.
If one AP pb is set to ON with both FDs OFF, the AP ‐ engages in HDG V/S or TRK FPA mode,
depending upon which mode the flight crew has selected on the FCU.
‐ If one AP pb is set to ON with at least one FD already ON, the AP engages in the current active
FD modes.
‐ At takeoff, the AP cannot be engaged below 100 ft.
AP engagement increases the break out force on the sidestick controllers and on the rudder pedals.
AP engagement is indicated by the lighting of the corresponding FCU pushbutton and by the
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 2(80)
