曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
You can enter a cost index and overwrite EO LRC. In this
case, clearing the cost index reverts to EO LRC.
[ 3L ] MANAGED This field displays the FMGS computed ECON speed/Mach (Refer to
99 Duref Cible FCOM).
Before the CLIMB phase is active, if the preselected speed mode is
SELECTED, an asterisk appears next to the MANAGED speed. In
this case, pressing the 3L key preselects MANAGED speed, and 4L
reverts to brackets.
[ 4L ] PRESEL or
SELECTED
If the climb phase is active :
The title of this field becomes "SELECTED".
This field displays the selected (or preselected) SPD or MACH target.
The pilot cannot modify this field directly, but can adjust it with the
FCU's SPD/MACH selection knob.
If the pilot pushes in the FCU's SPD/MACH selection knob to
revert to managed speed, the system selects (or reselects) ECON
SPD/MACH, and [ 4L ] is blank.
If the climb phase is inactive :
This field displays PRESEL, as long as the climb phase is inactive.
The pilot can only enter a preselected speed.
[ 5L ] Blank or EXPEDITE This field is blank, as long as the aircraft is in preflight.
This field displays this legend, when the takeoff or climb phase is
active.
It indicates the time and distance required to reach the altitude
displayed in the 2R field, in case of climb at green dot.
[ 6L ] PREV PHASE This field displays this legend, if the climb phase is inactive. The pilot
presses this key to call up the takeoff page.
[ 6L ] ACTIVATE APPR
PHASE
The field displays this legend, if the climb phase is active.
Pressing this key once displays “CONFIRM APPR PHASE*”.
Pressing it again activates the approach phase.
[ 1R ] DEST EFOB This field displays the predicted fuel on board at destination, in green
font.
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 91/126
FCOM 19 AUG 10
EO CLR In case of engine-out the [ 1R ] field displays the EO CLR prompt.
[ 2R ] PRED TO... This field displays the target altitude for the predictions shown in the
3R, 4R, or 5R field. It defaults to the FCU altitude, but the pilot can
modify it to any altitude below MAX ALT.
[ 3R ] [ 4R ] [ 5R ] These fields show time and distance predictions for the target altitude
selected in [ 2R ], computed for the current vertical mode and speed
mode (MANAGED, SELECTED, or EXPEDITE).
These fields are only displayed while the takeoff, or climb phase is
active.
[ 6R ] NEXT PHASE The pilot presses this key to call up the PERF CRZ page.
Applicable to:
,
,
MSN,,
4538,,
PERF CRUISE
A318/A319/A320/A321 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
AUTO FLIGHT - FLIGHT MANAGEMENT
CONTROLS AND INDICATORS - MCDU - PAGE DESCRIPTION
A318/A319/A320/A321 FLEET DSC-22_20-50-10-28 P 92/126
FCOM 19 AUG 10
TITLE CRZ is in large green font, when the cruise phase is active, and in
large white font, when it is inactive.
[ 1L ] ACT MODE This field shows the preselected or active speed mode : SELECTED
or MANAGED.
The pilot cannot modify it from this field.
[ 2L ] CI This field shows the cost index, as initialized on the INIT A page or
defaulted from the database, or as inserted in this field by the crew.
UTC CSTR automatically replaces the cost index value, if a time
constraint exists in the F-PLN.
EO LRC automatically replaces the cost index value in case of an
engine-out.
[ 3L ] MANAGED This field displays the FMGS-computed ECON speed/Mach (Refer to
99 Duref Cible FCOM).
Before the CRUISE phase is active, if the preselected speed mode
is SELECTED, an asterisk appears next to the MANAGED speed. In
this case, pressing the 3L key preselects MANAGED speed, and 4L
reverts to brackets.
[ 4L ] PRESEL If the cruise phase is active :
This field is blank.
If the cruise phase is inactive :
The pilot can enter a preselected speed or Mach number.
[ 6L ] PREV PHASE or The pilot can press this key to call up the climb page, if the cruise
phase is not yet active.
[ 6L ] ACTIVATE APPR
PHASE
This field displays this legend, if the cruise phase is active. The flight
crew presses this key once to change the legend to “CONFIRM
APPR PHASE*”.
A second press activates the approach phase.
Note: If the pilot inadvertently activates the approach phase, he
can reselect the cruise flight level from the progress page, in
order to reactivate the cruise phase.
[ 1R ] TIME/UTC DEST
EFOB
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A320机组操作手册FLIGHT CREW OPERATING MANUAL 2(8)
