曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
set to 1.
5.2.5.2.5.1.5 Supervisory type (ST). This field shall be
set to 2.
5.2.5.2.5.1.6 Address, ground or address, mobile. The
AG and AM values in the originating Mode S CALL
REQUEST by ADLP or CALL REQUEST by GDLP packets
shall be returned in these fields. When present, DTE addresses
in the IS0 8208 CLEAR REQUEST packet shall be ignored.
5.2.5.2.5.1.7 Clearing cause (CC) and diagnostic code
(DC)je lds. These fields shall be transferred without modification
from the IS0 8208 packet to the Mode S packet when
the DTE has initiated the clear procedure. If the XDLP has
initiated the clear procedure, the clearing cause field and
diagnostic field shall be as defined in the state tables for the
DCE and XDCE (see also 5.2.6.3.3). The coding and
definition of these fields shall be as specified in IS0 8208.
5.2.5.2.5.2 Translution into 1SO 8208 packets
5.2.5.2.5.2.1 Translution. Reception by the GDLP
reformatting process of a Mode S CLEAR REQUEST by
ADLP packet (or an S-bit sequence of packets) from the local
GDCE shall result in the generation of a corresponding IS0
8208 CLEAR REQUEST packet to the local DCE. The
translation from the Mode S packet to the IS0 8208 packet
shall bc the inverse of the processing defined in 5.2.5.2.5.1.
5.2.5.2.5.2.2 Called DTE, calling DTE and lengthjelds.
These fields shall be omitted in the IS0 8208 CLEAR
REQUEST packet.
5.2.5.2.6 CLEAR REQUEST BY GDLP
5.2.5.2.6.1 Translation into Mode S packets
Fields shown in the packet format and not specified in the
following paragraphs shall be set as specified in 5.2.5.2.1,
5.2.5.2.2 and 5.2.5.2.5.
5.2.5.2.6.1.2 Data packet type (DP). This field shall be
set to 0.
5.2.5.2.6.1.3 MSP packet type (MP). This field shall be
set to 1.
5.2.5.2.6.1.4 Supervisoiy packet (SP). This field shall be
set to 1.
5.2.5.2.6.1.5 Supervisory type (ST). This field shall. be
set to 2.
5.2.5.2.6.2 Translation into IS0 8208 packets
5.2.5.2.6.2.1 Translation. Reception by the ADLP
reformatting process of a Mode S CLEAR REQUEST by
GDLP packet (or an S-bit sequence of packets) from the local
ADCE shall result in the generation of a corresponding IS0
8208 CLEAR REQUEST packet to the local DCE. The
translation from the Mode S packet to the IS0 8208 packet
shall be the inverse of the processing defined in 5.2.5.2.6.1.
5.2.5.2.6.2.2 Called DTE, calli~agD TE and lengtlz fields.
These fields shall be omitted in the IS0 8208 CLEAR
REQUEST packet.
5.2.5.2.7 DATA
5.2.5.2.7.1 Translation into Mode S packets
5.2.5.2.7.1.1 Trunslatedpacketformat Reception by the
XDLP reformatting process of IS0 8208 DATA packet(s)
from the local DCE shall result in the generation of corresponding
Mode S DATA packet(s) as determined by M-bit
processing (5.2.5.1.4.1), as follows:
5.2.5.2.6.1.1 Translatedpacketformat. Reception by the
GDLP reformatting process of an IS0 8208 CLEAR
REQUEST packet from the local DCE shall result in the
generation of corresponding Mode S CLEAR REQUEST by 5.2.5.2.7.1.2 Data packet type (DP). This field shall be
GDLP packet(s) (as determined by S-bit processing set to 1.
(5.2.5.1.4.2)) as follows:
5.2.5.2.7.1.3 Mjeld (M). A value of I shall indicate that
the packet is part of an M-bit sequence wilh more packets in
the sequence to follow. A value of 0 shall indicate that the
sequence ends with this packel. The appropriate value shall be
placed in the M-bit field of the Mode S packet.
7/11/96
No. 71
Part I Annex 10 - Aeronautical Telecommunications
Note.- See 5.2.5.1.4 and IS0 8208 for a complete 5.2.5.2.8.1.2 Data packet type (DP). This field shall be
explanation. set to 0.
5.2.5.2.7.1 -4 Sequence number (SN). The sequence 5.2.5.2.8.1.3 MSP packet iype (MP). This field shall be
number field shall be set as specified in 5.2.5.2.1.1.7. set to 1.
5.2.5.2.7.1.5 Packet send sequence nunzber (PS). The
packet send sequence number field shall be set as specified in
5.2.6.4.4.
5.2.5.2.7.1.6 Packet receive sequence number (PR). The
packet receive sequence number field shall be set as specified
in 5.2.6.4.4.
5.2.5.2.7.1.7 Channel number (CH). The channel
number ficld shall contain the Mode S channel number that
corresponds to the incoming IS0 8208 DATA packet channel
number.
5.2.5.2.7.1.8 User data length (LV). This field shall
indicate the number of full bytes used in the last SLM or ELM
segment as defined in 5.2.2.3.1.
5.2.5.2.7.1.9 Fill (FILL]). This field shall be set as
specified in 5.2.5.2;1.1.1,1.
5.2.5.2.7.1.10 User data (UD). The user data shall be
transferred from the IS0 8208 packet to the Mode S packet
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
附件10--航空电信an10_v3_1ed_amend_71(23)
