曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
following paragraphs shall be set as specified in 5.2.5.2.1.
5.2.5.2.3.1.2 Data packet type (RP). This field shall be
set to 0.
5.2.5.2.3.1.3 MSP packer type (MP). This field shall be
set to 1.
5.2.5.2.3.1.4 S~~pervisorypaok(eSt P).T his field shall be
set to 1.
5.2.5.2.3.1.5 Supervisoq type (ST). This field shall be
set to 1.
7/11/96
No. 71
Annex 10 - Aeronautical Telecommunications
5.2.5.2.3.1.6 Temporary channel number (TC). The TC
value in the originating Mode S CALL REQUEST by GDLP
packet shall be returned to the GDLP along with the channel
number (CH) assigned by the ADLP.
5.2.5.2.3.1.7 Channel number (CH). The field shall be
set equal to the channel number assigned by the ADLP as
determined during the CALL REQUEST procedures for the
Mode S connection.
5.2.5.2.3.1.8 Address, mobile and uddress, ground. The
AM and AG values in the originating Mode S CALI,
REQUEST by GDLP packet shall be returned in these fields.
When present, DTE addresses in the IS0 8208 CALL
ACCEPT packet shall be ignored.
5.2.5.2.3.2 Translation into IS0 8208 packets
5.2.5.2.3.2,l Translation. Reception by the GDLP
reformatting process of a Mode S CALL ACCEPT by ADLP
packet (or an S-bit sequence of packets) from the GDCE shall
result in the generation of a corresponding IS0 8208 CALL
ACCEPT packet to the local DCE. The translation from the
Mode S packet to the IS0 8208 packet shall be the inverse of
the processing defined in 5.2.5.2.3.1 with the exceptions as
specified in the following paragraph.
5.2.5.2.3.2.2 Called DTE, calling DTE address and
length jields. The called DTE address shall be composed of
the aircraft address'and the value contained in the AM field of
the Mode S packt, converted to BCD (5.2.3.1.3.2). The
calling DTE address shall be the ground DTE address
contained in the AG field of the Mode S packet, converted to
BCD. The length field shall be as defined in IS0 8208.
5.2.5.2.4 CALL ACCEPT BY GDLP
5.2.5.2.4.1 Translation into Mode S packets
5.2.5.2.4.1.1 Translatedpacketfomat. Reception by the
GDLP reformatting process of an IS0 8208 CALL ACCEPT
packet from the local DCE shall result in the generation of
corresponding Mode S CALL ACCEPT by GDLP packet(s)
(as determined by S-bit processing (5.2.5.1.4.2)) as follows:
5.2.5.2.4.1.3 MSP packet type (MP).T his field shall be
set to 1.
5.2.5.2.4.1.4 Supervisory pucket (SP). This field shall be
set to 1.
5.2.5.2.4.1.5 Supervisory type (ST). This field shall be
set to 1.
5.2.5.2.4.1.6 Address, mobile and adress, ground. The
AM and AG values in the originating Mode S CALL
REQUEST by ADLP packet shall be returned in these fields.
When present, DTE addresses in the IS0 8208 CALL
ACCEPT packet shall be ignored.
5.2.5.2.4.2 Translation into IS0 8208 packets
5.2.5.2.4.2.1 Translation. Reception by the ADLP
reformatting process of a Mode S CALL ACCEPT by GDLP
packet (or an S-bit sequence of packets) from the ADCE shall
result in the generation of a corresponding IS0 8208 CALL
ACCEPT packet to the local DCE. The translation from the
Mode S packet to the IS0 8208 packet shall be the inverse of
the proccssing defined in 5.2.5.2.4.1 with the exceptions as
specified in the following paragraph.
5.2.5.2.4.2.2 Called DTE, calling DTE address and
length fields. The calling DTE address shall be composed of
the aircraft address and the value contained in the AM field of
the Mode S packet, converted to BCD (5.2.3.1.3.2). The called
DIE address shall be the ground DTE address contained in the
AG field of the Mode S packet, converted to BCD. The length
field shall be as defined in IS0 8208.
5.2.5.2.5 CLEAR REQUEST sr ADLP
5.2.5.2.5.1 Translation into Mode S packets
5.2.5.2.5.1,l Translutedpacketforrnat. Reception by the
ADLP reformatting process of an IS0 8208 CLEAR
REQUEST packet from the local DCE shall result in the
generation of a corresponding Mode S CLEAR REQUEST by
ADLP packet(s) (as determined by S-bit processing
(5.2.5.1.4.2)) as follows:
Fields shown in the packet format and not specified in the
Fields shown in the packet format and not specified in the following paragraphs shall be set as specified in 5.2.5.2.1 and
following paragraphs shall be set as specified in 5.2.5.2.1. 5.2.5.2.2.
5.2.5.2.4.1.2 Data packet iype (DP). This field shall be 5.2.5.2.5.1.2 Data packet type (DP).T his field shall be
set to 0. set to 0.
7/11/96
No. 71
Annex 10 - Aeronautical Telecommunications Volume 121
5.2.5.2.5.1.3 MSPpacket type (MP). This field shall be
set to I.
5.2.5.2.5.1.4 Supervisory packet (SP). This field shall be
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
附件10--航空电信an10_v3_1ed_amend_71(22)
