曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
The following sections are part of the NAV sector format.
On-side Course Display
The (left) display window shows on-side course information in green, yellow or white
(VOR/LOC on-side green, VOR/LOC cross-side yellow, FMS on-side white or FMS
cross-side yellow). This information is the active NAV course data displayed on the
on-side PFD.
Cross-side Course Display
The (right) display window shows cross-side course information in cyan. This
information is the active NAV course data displayed on the cross-side PFD.
Cross-side course information is selected or deselected for
display by the PUSH X-SIDE switch on the DCP.
Range Rings
There are two range rings, which provide a distance scale to help visualize the airplane
position relative to navaid symbols and weather radar targets. A distance annunciator
displays by each ring. The RANGE knob (on the DCP) selects a desired display range.
The possible full-scale ranges are 5, 10, 25, 50, 100, 200, 300 and 600 nm (maximum
is 300 nm with WX selected on).
The outer range ring is a 120-degree sector of the compass rose. This arc contains
index markings every five degrees and alphabetic or numeric markings every 30
degrees. The inner range ring is a circle that is centered on the airplane.
NAVAID Display
The NAVAID display shows airplane heading, selected heading, on-side course, crossside
course, bearing, vertical deviation and wind information.
The sector format may display (only) two or three navaid symbols. These symbols are
generated using bearing/distance information (not FMS map data). VORTAC symbols
with station identifiers display if the two actively tuned VOR stations are within range
and data is valid. The TO waypoint of the FMS flight plan will also display. No other
navaid symbols display on the sector format.
NOTE
FLIGHT INSTRUMENTS
For Training Purposes Only
May 03
11-39
P I LOT T R A I N I N G GU I D E
MFD Sector Format
Figure 11-21
ADF
UTC01 : 50
TTG11 : 04
LOC1
IUL
CRS 059 FMS2 DTK 030
TAS 146 GS 145 SAT 10C TAT–13C
TGT
8.5NM YUL 12.7NM
TTG11 : 04
5
10
059
NAV SECTOR
RADAR OFF
VOR1 VOR2
UTC22 : 40
TTG11 : 04
FMS1
YUL
DTK 333 FMS2 DTK 333
TAS 0 GS 0 SAT 15C TAT–15C
TGT
12.7NM YUL 12.7NM
TTG11 : 04
YUL
HOKKE
CYUL
12.5
25
059
NAV SECTOR
LX/RADAR OFF
P604_11_040
SECTOR FORMAT WITH CROSS-SIDE
DATA SELECTED AND WEATHER RADAR OVERLAY
SECTOR FORMAT APPROACH
ABOVE
BELOW
FLIGHT INSTRUMENTS
11-40 For Training Purposes Only
May 03
P I LOT T R A I N I N G GU I D E
FMS Map Format
This format shows a dynamic geographic depiction of the flight as it occurs. The map
display is always centered on the airplane present position with current heading
toward the top of the screen. The screen shows a moving map display of flight plan
symbols and background navaid symbols relative to airplane present position.
An FMS data window may be displayed on the FMS map.
Airplane Symbol
This symbol is a reference used to visualize airplane position relative to the
geographic map and radar targets. The airplane symbol is stationary and always
displayed in the center of the screen. The navaid symbol, radar targets and flight plan
line move down the screen as the flight progresses.
Range Rings
There are two range rings displayed, which provide a distance measuring scale. These
rings show distance from the airplane. A distance annunciator displays by each ring.
The RANGE knob (on the DCP) selects a desired display range. The possible fullscale
ranges are the same as for NAV Sector format.
NAV Display
The NAV display shows the FMS flight plan line and a background navigation map.
The map consists of navaid symbols generated from the FMS database. The FMS
flight plan displays on the map as a solid white line. This track line consists of straightline
segments connecting consecutive flight plan waypoints. The TO waypoint
displays in magenta. FMS-generated navaid and map symbols are cyan.
Data Window
The data window displays FMS progress parameters for the FROM, TO, NEXT and
Destination waypoints in the flight plan. The CDU is used to select the various options
of the data window. The data window can be selected to ON, COMP, VNAV, or OFF.
NOTE
FLIGHT INSTRUMENTS
For Training Purposes Only
May 03
11-41
P I LOT T R A I N I N G GU I D E
MFD Data Window
Figure 11-22
P604_11_041
LEFT DISPLAY MENU 1/2
HI NAVAIDS
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
庞巴迪挑战者手册1(80)
