LOWER LOBE CARGO COMPARTMENT -FLOOR PANELS AND WALKWAYS
EFFECTIVITY BEJ ALL  25-52-00  
Page 15  
D633W101-BEJ  Jan 05/2002 
LOWER LOBE CARGO COMPARTMENT -BULK CARGO FLOOR
Purpose 
The bulk cargo compartment floor supports the cargo. 
Physical Description 
Bulk cargo floor panels are made of aluminum-fiberglass laminate material. Three layers of sheet aluminum are bonded to two layers of fiberglass sheet. 
Bolts attach the floor panels to the structure. Anchor fittings attach tie downs and cargo nets to the floor. Rubstrips protect the floor. 
EFFECTIVITY BEJ ALL  25-52-00  
Page 16  
D633W101-BEJ  Sep 05/2002 
LOWER LOBE CARGO COMPARTMENT -BULK CARGO FLOOR
EFFECTIVITY BEJ ALL  25-52-00  
Page 17  
D633W101-BEJ  Jan 05/2002 
LOWER LOBE CARGO COMPARTMENT -BULK CARGO DOOR PROTECTOR
Purpose 
The bulk cargo door protector keeps cargo clear of the bulk cargo door opening. 
Physical Description 
The bulk cargo door protector is made from fiberglass-faced paper honeycomb core material. Two support fittings attach the bulk cargo door protector to the cargo compartment ceiling. Struts brace the bottom of the door protector. 
The struts have hinges that permit the door protector to fold up against the bulk cargo door. The hinges lock when the struts are straight. 
There is a strap at the bottom of the door protector. When the strap is not in use, hook and loop tape holds the loose end of the strap to the door protector 
Location 
The bulk cargo door protector is in the bulk cargo compartment, inboard of the door opening. 
Operation 
When the bulk cargo door is open, fold the hinges on the struts and lift the door protector. Attach the strap to the fitting on the door frame (not shown) to hold the door protector up. 
EFFECTIVITY BEJ ALL  25-52-00  
Page 18  
D633W101-BEJ  Sep 05/2002 
LOWER LOBE CARGO COMPARTMENT -BULK CARGO DOOR PROTECTOR
EFFECTIVITY BEJ ALL  25-52-00  
Page 19  
D633W101-BEJ  Jan 05/2002 
LOWER LOBE CARGO COMPARTMENT -BULK CARGO NETS
Purpose 
The bulk cargo divider net keeps cargo in the bulk cargo compartment. The divider net also isolates the aft and bulk cargo compartments for temperature control. 
The door net helps keep cargo clear of the bulk cargo door opening. 
Physical Description 
The divider net is nylon webbing with an insulation blanket attached. 
The door net is nylon fabric reinforced with nylon webbing. 
Adjustable fittings attach the nets to the structure. 
Location 
The divider net is at the forward end of the bulk cargo compartment. 
The door net is in the bulk cargo compartment, aft and inboard of the door opening. 
EFFECTIVITY BEJ ALL  25-52-00  
Page 20  
D633W101-BEJ  Sep 05/2002 
LOWER LOBE CARGO COMPARTMENT -BULK CARGO NETS
EFFECTIVITY BEJ ALL  25-52-00  
Page 21  
D633W101-BEJ  Jan 05/2002 
777 AIRCRAFT MAINTENANCE MANUAL
THIS PAGE IS INTENTIONALLY LEFT BLANK
25-53-00
Page 1 D633W101-BEJ Jan 05/2002 
BOEING PROPRIETARY -Copyright # -Unpublished Work -See title page for details.
CARGO HANDLING SYSTEM -INTRODUCTION
General 
The cargo handling system lets a single operator safely load, unload, and lock cargo. 
Cargo handling is a subsystem of equipment and furnishings. 
Abbreviations and Acronyms 
* 
aux -auxiliary
* 
cmd -command
* 
CSC -cargo system controller
* 
ctr -center
* 
fwd -forward
* 
LBL -left buttock line
* 
LCD -large cargo door
* 
LD -load device
* 
LED -light emitting diode
* 
LRU -line replaceable unit
* 
MEC -main equipment center
* 
PSEU -proximity sensor electronics unit
* 
PDU -powered drive unit
* 
ref -reference
* 
ret -retractable
* 
RBL -right buttock line
* 
sta -station line
* 
typ -typical
* 
ULD -unit load device
EFFECTIVITY BEJ ALL  25-53-00  
Page 2  
D633W101-BEJ  Sep 05/2002 
777 AIRCRAFT MAINTENANCE MANUAL 中国航空网 www.aero.cn 航空翻译 www.aviation.cn 本文链接地址:777 AMM 飞机维护手册 Equipment and Furnishings(19)