• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2011-04-19 07:59来源:蓝天飞行翻译 作者:航空
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

 |  becomes discolored, or  |  |  |  |  |  |  |  |  |
 |  stained, or the blending  |  |  |  |  |  |  |  |  |
 |  of adjacent surfaces for  |  |  |  |  |  |  |  |  |
 |  appearance is necessary,  |  |  |  |  |  |  |  |  |
 |  refer to the operators  |  |  |  |  |  |  |  |  |
 |  standard procedures.  |  |  |  |  |  |  |  |  |

 ................................................................................. | Short Term | | | | | | | | |
__________ | | | | | | | | | | ................................................................................. | 1. Wash the airplane at each 7- to | | X | X | | | | | | | 14-day cycle (AMM 12-25-01). | | | | | | | | | ................................................................................. | 2. Apply wax to the areas that are not | | | | X | | | | | | painted at each 28-day cycle. Do | | | | | | | | | | this after the complete airplane has | | | | | | | | | | been washed (AMM 12-25-01). | | | | | | | | | ................................................................................. | 3. Apply a temporary layer of Protective| X | | | | | | | | | Coating to all metal that is not | | | | | | | | | | painted. Do not include the engine | | | | | | | | | | tail cones or other components that | | | | | | | | | | operate with high temperatures (the | | | | | | | | | | paint would burn off). Apply a layer| | | | | | | | | | of Ardrox 306-N as follows: | | | | | | | | | ................................................................................. | A. Procedure | | | | | | | | |
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 10-11-02
 ALL  ú ú 02 Page 206 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 ~............................................................................... | | Procedures Repeat Intervals (Days) | | ....................................... | | | | | | | | | As| | Item | Initial | 7 | 14| 30| 60| 90|180|Rqd| .................................................................................
 |  (1) Apply with a spray gun (air  |  |  |  |  |  |  |  |  |
 |  or airless) to get a  |  |  |  |  |  |  |  |  |
 |  uniform dry film thickness of |  |  |  |  |  |  |  |  |
 |  1.5 |0.5 mils.  The applied  |  |  |  |  |  |  |  |  |
 |  layer must be smooth,  |  |  |  |  |  |  |  |  |
 |  transparent, and  |  |  |  |  |  |  |  |  |
 |  continuous.  |  |  |  |  |  |  |  |  |

 ................................................................................. | B. Cure | | | | | | | | | ................................................................................. | (1) Before you touch - let the | | | | | | | | | | Protective Coating cure at | | | | | | | | | | room temperature for 20 | | | | | | | | | | minutes (minimum). | | | | | | | | | ................................................................................. | (2) Before you stack - let the | | | | | | | | | | Protective Coating cure at | | | | | | | | | | room temperature for 4 hours | | | | | | | | | | (minimum). | | | | | | | | | ................................................................................. | (3) Each 180-day cycle, remove | | | | | | | | | | the Protective Coating and | | | | | | | | | | apply it again. | | | | | | | X | | 2.........................................….........…...…...…...…...…...…...…...1
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 10-11-02
 ALL  ú ú 02 Page 207 ú Sep 28/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 ~............................................................................... | | Procedures Repeat Intervals (Days) | | ....................................... | | | | | | | | | As| | Item | Initial | 7 | 14| 30| 60| 90|180|Rqd| ................................................................................. | Long Term | | | | | | | | |
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:757 AMM 飞机维护手册 PARKING, MOORING, STORAGE & RETURN TO S(10)