(h)
Loose fasteners
(i)
Missing fasteners (fasteners that have pulled out or are gone)
(j)
Delaminations (a component with one or more layers pulled apart)
(k)
Parts that are not aligned correctly
(l)
Interference (clearance that is not sufficient between two parts)
(m)
Discoloration (heat damage)
(n)
Nicks or gouges
(o)
Other signs of damage
(2) Replace or repair the components that have one or more of the conditions given above.
TASK 05-51-35-212-031
2. Phase 1 Inspection
__________________
A. References
(1) AMM 51-10-00/601, Reduced Vertical Separation Minimum (RVSM)
B. All Overweight Landings
S 212-032
(1) Main Landing Gear and Support Structure Inspection
(a)
Examine all tires and wheels.
(b)
Look for signs of fluid leakage at the top and bottom of the outer cylinder.
NOTE: A small quantity of hydraulic fluid on the surface of
____ the inner cylinder of the shock strut is satisfactory.
(c)
Examine all structural components of the main landing gear and carefully examine the components that follow: 1) Shock strut 2) Trunnion link 3) Drag strut 4) Torsion links 5) Truck beam 6) Side strut 7) Downlock 8) Truck Position Mechanism (The mechanism that sets the angle
of the truck beam for retraction and extension) 9) Strut doors and the mechanism that retracts and extends the doors.
(d)
Examine the support structure of the main landing gear and carefully examine the components that follow: 1) Landing gear beam 2) Support fittings for the landing gear beam
a) Inboard
b) Outboard
3) Trunnion support fittings a) Forward b) Aft
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
05-51-35
ALL ú ú 01 Page 202 ú Sep 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL
4) Stabilizer links and fittings between the rear spar and landing gear beam. a) Inboard b) Outboard
S 212-033
(2) Nose Landing Gear Inspection
(a)
Examine all tires and wheels.
(b)
Look for signs of fluid leakage at the top and bottom of the outer cylinder.
NOTE: A small quantity of hydraulic fluid on the surface of
____ the inner cylinder of the shock strut is satisfactory.
(c)
Examine all structural components of the nose landing gear and carefully examine the components that follow: 1) Shock strut 2) Torsion links 3) Drag strut 4) Lock links
(d)
Examine the wheel well area and carefully examine the parts that follow: 1) Web (The left and right side walls) 2) Aft bulkhead 3) Trunnion attachments 4) Drag strut attachments
S 212-034
(3) Fuselage Inspection
(a) 757-200 AIRPLANES; Examine the skin panels on the lower side of the aft fuselage (Examine carefully between body stations 1370 and 1470, below stringer 20).
NOTE: Small buckles or wrinkles between fasteners are
____ indications of damage. Large buckles or wrinkles between fasteners are also indications of damage.
(b)
Examine the lower fuselage structure (body sections 46 and 48 for signs that the fuselage hit the runway.
(c)
Look for fuel leaks, and other fluid leaks, in the areas that follow: 1) The lower external surface of the fuselage in the area of
the wing-to-body fairing 2) The forward wall of the wheel wells of the main landing gear.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
05-51-35
ALL ú ú 01 Page 203 ú Sep 28/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
S 212-045
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：757 AMM 飞机维护手册 时间限制/维护检查(56)
