747-441 Operations Manual 747操作手册(41)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

VOR/ADF selectors -As desired Magnetic heading -Correct CRT select panel ..................................................................................Set
INBOARD CRT selector -NORM LOWER CRT selector -NORM PFD ................................................................................................ Check
Flight mode annunciation -Check
Verify autothrottle mode blank.
Verify roll mode TO/GA.
Verify pitch mode TO/GA.
Verify AFDS status FD.

Displays -Normal
Verify no flags displayed.
Verify no V SPD flag displayed until
V-speeds selected.

Heading -Check
Altimeter -Set
ND ................................................................................................. Check Heading/Track -Displayed, correct Route -Displayed, correct
Displays -Normal
Copyright . The Boeing Company. See title page for details.
April 01, 2001 D6-30151-425 NP.20.13
Normal Procedures -Amplified Procedures 747 Operations Manual

Verify no flags displayed. Standby attitude indicator ..............................................................Check
Caging control -Pull and release
Attitude -Correct
Verify no gyro flag.
APPROACH selector -OFF
Verify no ILS flags. Standby airspeed indicator .............................................................Check Standby altimeter ...........................................................................Check Seat ................................................................................................ Adjust
Adjust seat to obtain optimum eye reference position.
WARNING: Do not place objects between pilot’s seat and aisle stand. Injury can occur when seat adjusted forward.
Rudder pedals ............................................................................... Adjust

Adjust to permit full rudder pedal and brake application.
Call for BEFORE START checklist to “CLEARED FOR START”.
Before Start Procedure
Accomplish this procedure after papers are on board and flight crew is ready for push back and/or engine start.
CDU .................................................................................................... Set

Fuel quantity on CDU, manifest, and EICAS -Agree
Airplane zero fuel weight or gross weight -Enter
Fuel reserves -Enter
Cost index -Enter
Cruise altitude -Enter
THRUST LIM line select key – Push
Copyright . The Boeing Company. See title page for details.
NP.20.14 D6-30151-425 April 01, 2001

Normal Procedures -Amplified Procedures 747 Operations Manual
Select desired takeoff and climb derate.
TAKEOFF line select key -Push
Takeoff flap setting -Enter
Takeoff data -Review

Takeoff speeds -Select CG -Select MCP .....................................................................................................Set
IAS/MACH selector – Rotate
Set V2 speed in IAS/MACH window.
LNAV switch – As required

VNAV switch – Push
Arm VNAV.
Initial heading – Set

Initial altitude – Set Start clearance................................................................................Obtain Obtain clearance to pressurize hydraulic systems and start engines.
Hydraulic demand pump 4 selector ................................................. AUX Verify SYS FAULT light extinguished. PRESS light remains illuminated. HYDRAULIC panel ............................................................................Set
Hydraulic demand pump 1, 2, and 3 selectors -AUTO Verify demand pump PRESS and SYS FAULT lights extinguished. Fuel tank quantities........................................................................ Check
Fuel panel ............................................................................................Set Fuel pump switches – ON
Copyright . The Boeing Company. See title page for details.
April 01, 2001 D6-30151-425 NP.20.15
Normal Procedures -Amplified Procedures 747 Operations Manual

Push fuel pump switches for tanks containing fuel to ON.Verify pump PRESS lights extinguished.
Pack control selectors ........................................................................ SET All packs may be off or one pack may be on for engine start. BEACON light switch................................................................... BOTH
RECALL switch ............................................................................... Push Verify only appropriate alert messages displayed. If FUEL TANK/ENG message displayed:
Verify fuel quantity in tank 2 less than or equal
to tank 1, or tank 3 less than or equal to tank 4
(fuel tank-to-engine); or fuel quantity in tank 2
less than or equal to tank 1 plus 500 kgs. and
tank 3 less than or equal to tank 4 plus 500
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：747-441 Operations Manual 747操作手册(41)