Crossfeed selector ............................................................................ Open
Manual defueling valve ................................................................... Open
Center tank fueling valve switch ................................................... OPEN
Fuel transfer .................................................................................Monitor
The center tank fuel quantity indicator shows an increase in fuel.
The main tank indicators show a decrease in fuel.
Center tank fueling valve switch .............................................. CLOSED When the required amount of fuel has been transferred, the switch is closed at the fueling panel.
Manual defueling valve ...................................................................Close
Crossfeed selector ............................................................................Close
Main tank fuel pump switches .......................................................... OFF
Main Tanks ......................................................................................Refill
Refueling panel and defuel panel access doors ...............................Close
Supplementary Procedures -Fuel 737 Operations Manual
Fuel Crossfeed Valve Check
Crossfeed selector ............................................................................Open Verify Crossfeed VALVE OPEN light illuminates bright and then dim.
Crossfeed selector ........................................................................... Close Verify Crossfeed VALVE OPEN light illuminates bright and then extinguishes.
Fuel Quantity Indicators Test
Note: With a fuel quantity indicator inoperative, a zero fuel quantity input will be sent to the fuel summation unit causing a possible FMC gross weight error.
Fuel quantity test switch ................................................... Push and hold Hold until the fuel quantity indicators: (Simmond’s sunburst fuel quantity indicators) Drive to zero and
“ERR 4” is displayed.
(Smith’s sunburst fuel quantity indicators) Drive to zero and “ERR
0” is displayed.
Note: Do not push the QTY TEST switch when the airplane is being fueled. This will cause inaccurate indications at the external fueling panel.
Copyright . The Boeing Company. See title page for details.
SP.12.4 December 1, 2000
Supplementary Procedures -Fuel
737 Operations Manual
Fuel quantity test switch .............................................................. Release
Releasing the test switch initiates a self-test. The fuel quantity
indicators display:
(Simmond’s sunburst fuel quantity indicators)
.
All segments for two seconds
.
Blank for two seconds
.
Stored error codes (if any) for two seconds each
.
Indicator full scale value for up to two seconds
.
Actual fuel quantity
(Smith’s sunburst fuel quantity indicators)
.
“ERR 4” for approximately two seconds (early versions of
indicators)
.
All segments for two seconds
.
Blank for two seconds
.
Stored error codes (if any) for two seconds each
.
Indicator full scale value for up to two seconds
.
Actual fuel quantity
Copyright . The Boeing Company. See title page for details.
December 1, 2000 SP.12.5
Supplementary Procedures -Fuel 737 Operations Manual
Intentionally
Blank
Copyright . The Boeing Company. See title page for details.
SP.12.6 December 1, 2000
737 Operations Manual
Introduction
Airplane operation in adverse weather conditions may require additional considerations due to the effects of extreme temperatures, precipitation, turbulence, and windshear. Procedures in this section supplement normal procedures and should be observed when applicable.
The following recommendations apply to adverse weather operations in general:
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:737-300机组操作手册Flight Crew Operations Manual FCOM 1(71)