737-300机组操作手册Flight Crew Operations Manual FCOM 1(65)

曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

EXEC key ........................................................................................ Push Observe the MOD RTE HOLD page changes to RTE HOLD (ACT RTE HOLD if holding at PPOS).
Exiting Holding Pattern
HOLD key ........................................................................................ Push Observe EXIT HOLD prompt displayed.
EXIT HOLD line select key............................................................. Push Observe EXIT HOLD prompt changes to EXIT ARMED.
EXEC key ........................................................................................ Push Observe that EXIT ARMED is highlighted in reverse video and LNAV flight returns to the holding fix and resumes the active route.
Note: The holding pattern may be exited by performing a DIRECT TO modification if desired. In this case, the flight path may not return to the holding fix before proceeding to the selected waypoint.
Entering Created Waypoints on the Route or Route Legs Pages
Note: Created waypoints are stored in the temporary navigation data base for one flight only.
Copyright . The Boeing Company. See title page for details.
SP.11.8  December 3, 2004

Supplementary Procedures -Flight Management, Navigation
737 Operations Manual
RTE or RTE LEGS page.................................................................Select

Using any of the following methods, key into the scratch pad the parameters which define the new created waypoint (the place identifiers must already be stored in one of the FMC data bases):
.
 Place bearing/distance (for example, SEA250/40);

.
 Place bearing/place bearing (for example, SEA180/ELN270);

.
 Along–track displacement (for example, SEA/-10);

.
 Latitude and longitude (for example, N4731.8W12218.3).

Enter into the route by line selecting to the appropriate waypoint
sequence.
Repeat the above steps to define additional created waypoints as
desired. Correct any ROUTE DISCONTINUITY.

EXEC key.........................................................................................Push Observe the MOD RTE or MOD RTE LEGS page changes to ACT (for an inactive route, ACTIVATE and EXECute on the RTE or RTE LEGS page).
Along Track Displacement
RTE LEGS page .............................................................................Select

Line select the reference waypoint to the scratch pad. Add a “/” and the + or - distance desired. (EX: SEA/15 for a point 15 miles downtrack from SEA.)
Line select the reference waypoint. (The FMC will automatically
position the created waypoint to the appropriate position.)
EXEC key.........................................................................................Push Observe the MOD RTE LEGS page change to ACT.
Entering Created Waypoints on the Nav Data Pages
Note: Created waypoints entered on the SUPP NAV DATA pages (permitted on the ground only) are stored in the supplemental navigation data base for an indefinite time period; those entered on the REF NAV DATA pages are stored in the temporary navigation data base for one flight only.
INIT/REF key ...................................................................................Push Observe the INDEX prompt displayed.
INIT/REF INDEX page..................................................................Select

Copyright . The Boeing Company. See title page for details.
December 3, 2004  SP.11.9
Supplementary Procedures -Flight Management, Navigation 737 Operations Manual

Observe the NAV DATA prompt displayed. To access the SUPP NAV DATA page, key SUPP into the scratch pad.
NAV DATA page............................................................................ Select

If the SUPP NAV DATA page is selected, observe the EFF FRM date line displayed. Enter the current or appropriate date on line 3R and EXECute.
Enter a crew–assigned identifier on either the WPT IDENT, NAVAID IDENT, or AIRPORT IDENT line, as appropriate. Use the navaid category only for stations with DME.
DATA ...............................................................................................Enter

For a WPT IDENT entry, define the waypoint with entries for either latitude and longitude, or with entries for REF IDENT and RADIAL/DIST (the REF IDENT identifier must already be stored in one of the FMC data bases).
For a NAVAID IDENT or AIRPORT IDENT entry, enter appropriate
data.
The EXEC key illuminates when data has been entered into all box
prompts.
EXEC key ........................................................................................ Push

Repeat the above steps to define additional created waypoints as desired. To enter a new identifier in the same category, simply overwrite the previous identifier.
　
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：737-300机组操作手册Flight Crew Operations Manual FCOM 1(65)