曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
have disappeared(t he backgroundw ill be uniform).
C/D 1 test is used to test all front panel momentary
pushtiles. As each of the DD front panel momentary
pushtiles are depresseda, n X appearsa t the appropriate
location on the CD TEST 1 display (see Figure 38-38).
Note
Depressing the C/D TEST pushtile will exit
C/D TEST. Depressing the pushtile adjacent
to legend 2 or legend 3 will exit C/D 1 and
initiate C/D 2 or C/D 3.
b. CID TEST 2 Display. When C/D TEST 2 is selected,
the display shown in Figure 38-39 will appear on
the DD. The numeric values next to BRT, CON, and
SYMmaydifferslightlyfromthoseshownintheFigure,
depending on knob position.
CID TEST 2 tests all t?ont panel toggle and rotary
switches and potentiometers. As each of the SNIFF,
TGT, TRACK, and MLC switches are toggled into their
allowable positions, an Xwill be displayed in the appropriate
location. Rotating the CHAN, FA/MAN, and
JAM/JET switches into their allowable positions will
cause corresponding symbology changes on the panel
for the selected switch position. Rotating each potentiometer
through its 111 movement range will display a
correspondingd ecimal number that will vary from 00 to
lOto9Oto99.
c. C/D TEST 3 Display. When C/D TEST 3 is selected,
the DD display shown in Figure 3840 will appear
ThisdiqlayteststhecapabiityoftheDDtoreqmd
tosignals~minterfacing~~andtoothersignals.when
the SHC RDR switch is set to CMPTR, and the commands
showninFigure3841amissuedbytbeSCU,SSP,orDD,
theindicatedresponsesaredisplayednexttotheassociated
C 3 displayl egendsT. he SHC RDRCMPTR selectiona lso
enableste stsi nitiatedb y otherS HC controlsa ndTlD con-
Ms. Selectionsa nd mponses are showni n Figures3 842
and 38-43, mspectively.
39.5.2.1.9 Display Test Formats. The displays
test gives the RIO standard test patterns on the TID and
DD for evaluation. The displays test is divided into static
and dynamic testing. It is initiated by depressing the
MFK pushtile on the DD to obtain the radar modes
menu, selecting the pushtile adjacent to BIT to obtain
the BIT submenu,a nd then depressingt he pushtile adjacent
to DISP.
a. Static Testlng. When A’lTK is selected with the
TID MODE switch, the DD ANT, RDR, JAT, and TCS
indicator lamps will illuminate. The TID LAUNCH
ZONE, VEL VECTOR, and CLSN indicator lamps will
illuminate. ‘lhe TID center drum and steering drum will
be blank. The test pattern shown in Figure 38-44 will be
displayed on the DD, and the pattern shown in Figure
38-45 will be displayed on the TID.
When A/C STAB or GND STAB is selected with the
TID MODE switch, all DD indicator lamps will go off.
In addition, all TID indicator lamps will go off, the TID
center drum will read SENSOR, and the steering drum
will read MAN. The DD test pattern shown in Figure
38-46 will be displayed, and the TID will display the
pattern shown in Figure 3847.
ORIGINAL 38-52
TCS IN PROGRESS
TCS CURSOR 4
MAN AC0 J
TCS SLV RDR 4
TCS HALF-ACT J
d = PASS
x = FAU
RDR SLV TCS
Figure 38-35. TID Menu for TCS JBIT, In Progress
1 PROMPT
DISPLAY ON TlD
TCS CURSOR
1 MAN ACQ
1 TCS SLV RDR
TCS HALF-ACT
AUTO SRCH
1IN DEP
1 RDR SLV TCS
HCFWDRT
, HC HALF-ACT
UNIT
Sensor hand control
Digital display
Sensor slaving panel
Sensor hand control
Dlgltal display
Sensor slaving panel
Sensor slaving panel
Sensor hand control
Sensor hand control
RIO RE PONSE
ACTION
Select TCS cursor
Depress TCS MAN pushtile
Select TCS slave
Select half action and release
Depress TCS ASCH pushtlle
Select TCS IND
Select RDR slave
Position hand control to upper right
comer
Select half a&on, malntalnlng HCN
In upper rlght comer
Figure 38-36. TCS BIT Prompts and RIO Responses
38-53 ORIGINAL
I
.
.
I
Figure 38-38. C/D TEST 1 Display (After Aging Is Completed)
ORIGINAL
NAVAIR Of-WIAAD-T
Figure 38-39. C/D TEST 2 Display
-
ET H
7
I
I
Figure 38-40. CID TEST 3 Display N2lE
38-55 ORIGINAL
NAVAIR 0%FUAAD-I
SW CONTROL/SELECTION DD RESPONSE
STAB/IN IN
STAB/OUT OUT
FOV/WlDE WlDE
FOWNAR NARROW
TCS TRIM/A2 -22to +22
TCS TRIM/EL -44to +44
AZ SCAN/flO” 10
AZ SCANkt20° 20
AZ scANlf4o~ 40
AZ SCANkkS5” 85
EL BARS/l 1
EL BARS12 2
EL BARS14 4
EL BARS10 8
SSP CONlROL/SELECTlON DDRESPONSE
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
F-14D 飞行手册 Flight Manual 3(83)
