曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Maintenance WOD listed in table 3-5.
Table 3-5. Training/Maintenance WOD
and Common Net
Preset Channel WOD Segment Common Net
20 300.500 300.000
19 376-000 300.000
1 8 359.100 300.000
17 314.300 300.000
16 297.600 300.000
1 5 287.400 300.000
6. Function Selector switch - PRESET.
7. CHAN switch - Set to Channel 20.
8. PRESET button - Lift preset frequency label
cover and push PRESET button.
Repeat steps 5 through 8, setting channels 19 through
15 in order, substituting Training/Maintenance WOD
for existing preset channels. After preset channel 15
frequency has been entered, the WOD must be initialized.
3.7A.5 Initializing the Word Of Day (WOD).
NOTE
If power is lost, or if preset channel 20 is
selected when the MANUAL-PRESETGUARD
switch is in the PRESET position,
the initialize procedure will be required
again. To use this WOD, a TOD
and NET must be entered.
1. CHAN switch - Set to Channel 20. A single
beep should be heard.
2. CHAN switch - Set to Channel 19. A single
beep should be heard.
3. CHAN switch - Set to Channel 18. A single
beep should be heard.
4. CHAN switch - Set to Channel 17. A single
beep should be heard.
5.
6.
3.7A.6A
1.
2.
3.
4.
l
l
5.
6.
7.
8.
CHAN switch - Set to Channel 16. A single
beep should be heard.
CHAN switch - Set to Channel 15. A double
beep should be heard.
Multiple Word Of Day (MWOD) Loading.
CHAN switch - Set to Channel 20.
Function Selector switch - PRESET.
Frequency switches - Set to 220.025 (MWOD
LOAD).
PRESET button - Lift preset frequency label
cover and push PRESET button. Listen for
single beep.
NOTE
The radio is in the MWOD load mode.
The radio will transmit and receive in
the VERIFY/OPERATE mode only.
The radio is disabled and will not transmit
or receive in the M-LOAD,
ERASE, or FMT.CHG modes.
Function Selector switch - MANUAL.
CHAN switch - Set to Channel 20.
Frequency switches - Set to the first WOD
element.
TONE button - Press TONE and release. Listen
for a wavering tone. The first WOD element
is now entered.
Repeat steps 6 thru 8 for presets 19 thru 15, in that order,
substituting WOD elements for existing preset
channels.
9. CHAN switch - Set to Channel 14.
NOTE
l If two or more WODs have the same
date code, the radio recognizes only the
latest date entered.
l
10.
MWODs must be linked with an
associated day-of-month code. This
date code element has been added to every
operational and training segment
in HAVE QUICK and need only be
loaded when MWOD is used.
Frequency switches - Set to the applicable
day of the month code. Code format is
XAB.XXX, where A and B are the day of the
month the WOD is used. X can represent any
value. For example, if today were 26 June,
then select 226.025 or 326.475.
Change 4 3-18.3
TM 1-1520-238-10
11. TONE button - Press TONE and release. Listen
for a double beep. One complete WOD is
now loaded. To load more WODs, repeat steps
5 thru 11.
3.7A.66 Multiple Word Of Day (MWOD) HaveQuick
Operations.
NOTE
The operational date is the current Day of
Month and must be entered into Channel
1 so the radio can select the proper WOD.
1. Mode Selector switch - MAIN.
2. CHAN switch - Set to Channel 20.
3. Function Selector switch - PRESET.
4. Frequency switches - Set to 220.025 MHz
(MWOD LOAD).
5. PRESET button - Lift preset frequency label
cover and push PRESET button. Listen for
single beep.
6. Function Selector switch - MANUAL.
7. CHAN switch - Set to Channel 01.
8. Frequency switches - Set to the applicable
Day of Month code. Code format is XAB.XXX,
where A and B are the day of the month the
WOD is used.
9. TONE button - Press TONE and release. Listen
for a wavering tone.
10. Function Selector switch - PRESET.
11. CHAN switch - Set to Channel 20.
12. Frequency switches - Set to 220.000 MHz
(Verify/Operate).
13. PRESET button - Lift preset frequency label
cover and push PRESET button. Listen for
single beep. Radio is now ready to receive
TOD either via GPS or conventional means.
14. HQ SINC button - Press and hold for 3 seconds.
15. Function Selector switch - MANUAL.
16. Active Net - Select.
3.7A.7 Verifying MWOD is Loaded.
1. STATUS - Ensure radio is in the Verify/Operate
mode.
2. Function Selector switch - MANUAL.
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
阿帕奇攻击直升机操作手册1(67)
