• 热门标签

当前位置: 主页 > 航空资料 > 机务资料 >

时间:2010-06-06 21:52来源:蓝天飞行翻译 作者:admin
曝光台 注意防骗 网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者

sequence.
The primary restraint mechanism is a precision fuse
frangible link, which separates at a predetermined
force value.
In case of pressure loss, no fail handles, located on
both side of the runway end, allow the inflation to
be used as a hand-held evacuation chute.
In the event of a ditching, grasp lines are fitted
around the outside of the inflatable to facilitate the
use of slide as a flotation device.
The slide is equipped with a lighting system.
The lights located along the side tubes and across the
runway, are supplied from the aircraft emergency power
supply units.
The lights are automatically supplied with power when
the slide is deployed.
The escape slide can be disconnected from the aircraft
floor whenever necessary.
For the disconnection the following steps must be
taken.
Lift the flap of the girt extension to gain access to
the white disconnect handle.
Pull the handle.
The girt extension incorporates a quick release
feature, a daisy chain, which permits rapid detachment
of the inflatable from the aircraft.
TMUESFB03-T01 LEVEL 3
EFFECTIVITY 25-62-00 Page 2
Oct 31/96
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 25 EQUIPMENT/FURNISHINGS
UF94200
EFFECTIVITY Page 144
ALL
PASSENGER DOOR ESCAPE SLIDE DESCRIPTION/DEPLOYMENT
TMUESFB03-P01 LEVEL 3
EFFECTIVITY 25-62-00 Page 3
Oct 31/96
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 25 EQUIPMENT/FURNISHINGS
UF94200
EFFECTIVITY Page 145
ALL
PASSENGER DOOR ESCAPE SLIDE DESCRIPTION/DEPLOYMENT
Once detached from the floor the inflatable drops from
the aircraft but remains attached to the girt bar by
means of a string, which must be cut by using the knife
located next to it, on the girt extension.
The inflatable is then completely disconnected from
the aircraft.
TMUESFB03-T01 LEVEL 3
EFFECTIVITY 25-62-00 Page 4
Oct 31/96
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 25 EQUIPMENT/FURNISHINGS
UF94200
EFFECTIVITY Page 146
ALL
25 - EQUIPMENT/FURNISHINGS
25-62-00 PASSENGER DOOR ESCAPE SLIDE
DISCONNECTION
CONTENTS:
Passenger Door Escape Slide Disconnection
TMUESFG02 LEVEL 3
EFFECTIVITY 25-62-00 Page 1
Oct 31/96
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 25 EQUIPMENT/FURNISHINGS
UF94200
EFFECTIVITY Page 147
ALL
PASSENGER DOOR ESCAPE SLIDE DISCONNECTION
Passenger Door Escape Slide Disconnection
Disconnect the electrical line.
Tie the retaining cord to the slide handle.
Disconnect the slide attaching device by removing the
safety pin.
Undo the lacing system.
Remove the girt bar by unlocking the door threshold
supports.
Using the retaining cord, take the escape slide away.
TMUESFG02-T01 LEVEL 3
EFFECTIVITY 25-62-00 Page 2
Oct 31/96
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 25 EQUIPMENT/FURNISHINGS
UF94200
EFFECTIVITY Page 148
ALL
PASSENGER DOOR ESCAPE SLIDE DISCONNECTION
TMUESFG02-P01 LEVEL 3
EFFECTIVITY 25-62-00 Page 3
Oct 31/96
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 25 EQUIPMENT/FURNISHINGS
UF94200
EFFECTIVITY Page 149
ALL
THIS PAGE INTENTIONALLY LEFT BLANK
TMUESFG02 LEVEL 3
EFFECTIVITY 25-62-00 Page 4
Oct 31/96
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 25 EQUIPMENT/FURNISHINGS
UF94200
EFFECTIVITY Page 150
ALL
25 - EQUIPMENT/FURNISHINGS
25-62-00 PASSENGER DOOR ESCAPE SLIDE
INSTALLATION
CONTENTS:
Passenger Door Escape Slide Installation
TMUESFA03 LEVEL 3
EFFECTIVITY 25-62-00 Page 1
Jun 30/97
_A319/A320/A321 TECHNICAL TRAINING MANUAL
MECHANICS / ELECTRICS & AVIONICS COURSE 25 EQUIPMENT/FURNISHINGS
UF94200
EFFECTIVITY Page 151
ALL
PASSENGER DOOR ESCAPE SLIDE INSTALLATION
PASSENGER DOOR ESCAPE SLIDE INSTALLATION
Check that door emergency opening percussion system
behind the door support arm, is in the disarmed
position.
First, connect the electrical line... place it on the
right-hand side or left-hand side according to the
door.
Fit the girt bar into the mooring line and slide it
into the slide attaching device.
Connect to the standby percussion system.
Connect to the normal percussion system.
 
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址:ATA 25 EQUIPMENT AND FURNISHINGS(19)