曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
Crankshaft .0045L .006(0L
Main Bearings and Crankshaft .0011L
(Except Front) .0041L .005(0L
H3-H5-P-AB-AC Front Main Bearings and .0011L
Crankshaft .0041L .0050L0L
E-H-P Diameter of Main Bearing 2.3745
Journal on Crankshaft 2.376 (E)
500 955 E-H1-H2-H4 Crankcase Bearing Bore 2.566
Diameters (All) 2.567 2.5685
H3-H5-P-AB-AC Crankcase Bearing Bore 2.6865
Diameters (All) 2.6875 2.6890
501 502 ALL Connecting Rod Bearings .0008L
and Crankshaft .0038L .0050L
ALL Diameter of Connecting Rod 2.1235
Journal on Crankshaft (2-1/8 in.) 2.125 (E)
501 954 ALL Connecting Rod Bearing Bore
Diameter ° (Measured at axis 2.2870
30 on each side) 2.2875
502 564 ALL Connecting Rod Side Clearance .004L
.010L .016L
503 566 ALL Connecting Rod Alignment .010 in 10 Inches
504 567 ALL Connecting Rod Twist .012 in 10 Inches
505 556 ALL Crankshaft Run-Out At Center
Main Bearings
Mounted on No. 1 and 4 Journals
Max. Run-Out No. 2 and 3 Journals .005 .0075
Mounted on No. 1 and 3 Journals
Max. Run-Out No. 2 Journal .003 .0045
Mounted on No. 2 and 4 Journals
Max. Run-Out No. 3 Journal .003 .0045
Crankshaft and Crankcase Front .006L
End Clearance .015L .025L
510 504 E-H1-H2-H3 Crankshaft Timing Gear and .0015L
Crankshaft .0005T (A)
H4-H5-P-AB-AC Crankshaft Timing Gear and .0000
Crankshaft .0015T (A)
511 536 ALL Tappet Body and Crankcase .0010L
.0033L .004L
SSP1776 SSP1776 3-1
SERVICE TABLE OF LIMITS
PART III GEARED ENGINES
SECTION I CRANKCASE, CRANKSHAFT, CAMSHAFT
R ef.Ref. Chart Nomenclature Dimensions Clearances
Mfr. Mfr.
New Old
Min. Serv. Min. Serv.
& Max. & Max.
Max. Max.
511 -536 ALL 0 .D. of Tappet .7169 .7177 .7166
511 536: I.D. Bore in .7187
ALL D. Tappet Crankcase .7200 .7203
512 559 ALL Tappet
Plunger Assembly .0010L andd Body (Hyperbolic) .0067 L .0087L
513 560 Tappet and .002L
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：Lycoming SERVICE TABLE OF LIMITS AND TORQUE VALUE RECOMMENDATIONS(33)
