F 『 EEFF : ALL E ∞∞78-00-00∞∞∞∞∞∞∞∞∞∞Page 201
E E Feb 01/98 E E ECES
E
F 『
E C F M E
E E
E 56 E
E E
3. Fault Confirmation
__________________
A. Test
(1) Do a check to see if the REV indication is shown on the upper ECAM display unit with the DMC3 switched on.
4. Fault Isolation
_______________
R A. If the REV indication is present on the upper ECAM display with the DMC3 switched on:
(1) Replace the DMC-1 (1WT1) (Ref. AMM TASK 31-63-34-000-001) and (Ref. AMM TASK 31-63-34-400-001).
R B. If the REV indication is not present on the upper ECAM display unit with R the DMC3 switched on:
(1) Do a check to make sure that the blocker door latches are correctly unlocked.
(a) If there are not correctly unlocked:
- replace the defective: LATCH-BLOCKER DOOR, UPPER R (3002KM1) or LATCH-BLOCKER DOOR, LOWER R (3002KM2) or LATCH-BLOCKER DOOR, UPPER L (3002KM3) or LATCH-BLOCKER DOOR, LOWER L (3002KM4) (Ref. AMM TASK 78-31-19-000-001) and (Ref. AMM TASK 78-31-19-400-001).
(2) If the fault continues:
- manually release the actuator to make sure that the blocker door or the hydraulic actuator operates correctly.
(a) If the blocker door does not operate correctly:
- replace the defective lower blocker door (Ref. AMM TASK 78-32-41-000-001) (Ref. AMM TASK 78-32-41-400-001) or
- replace the defective upper blocker door (Ref. AMM TASK 78-32-41-000-002) (Ref. AMM TASK 78-32-41-400-002).
(b) If the hydraulic actuator does not operate correctly:
- replace the defective: ACTUATOR-BLOCKER DOOR, UPPER R (3001KM1) or ACTUATOR-BLOCKER DOOR, LOWER R (3001KM2) or ACTUATOR-BLOCKER DOOR, LOWER L (3001KM3) ACTUATOR-BLOCKER DOOR, UPPER L (3001KM4) (Ref. AMM TASK 78-31-41-000-001) (Ref. AMM TASK 78-31-41-400-001).
(c) If the blocker door or hydraulic actuator operates correctly:
- replace the HCU-THRUST REV (4101KS) (Ref. AMM TASK 78-31-51-000-042) and (Ref. AMM TASK 78-31-51-400-042).
C. Do the operational test of the thrust reverser system (Ref. AMM TASK 78-31-00-710-042).
F 『 EEFF : ALL E ∞∞78-00-00∞∞∞∞∞∞∞∞∞∞Page 202
E E May 01/98 E E ECES
E
F 『
E C F M E
E E
E 56 E
E E
TASK 78-00-00-810-802
REV Indication Stays Amber on Engine 1 or 2
1. Possible Causes
_______________
- DMC-1 (1WT1)
- LATCH-BLOCKER DOOR, UPPER R (3002KM1)
- LATCH-BLOCKER DOOR, LOWER R (3002KM2)
- LATCH-BLOCKER DOOR, LOWER L (3002KM3)
- LATCH-BLOCKER DOOR, LOWER L (3002KM4)
- lower blocker door
- upper blocker door
- ACTUATOR-BLOCKER DOOR, UPPER R (3001KM1)
- ACTUATOR-BLOCKER DOOR, LOWER R (3001KM2)
- ACTUATOR-BLOCKER DOOR, UPPER L (3001KM3)
- ACTUATOR-BLOCKER DOOR, LOWER L (3001KM4)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 31-63-34-000-001 Removal of the DMC (1WT1,1WT2,1WT3)
AMM 31-63-34-400-001 Installation of the DMC (1WT1,1WT2,1WT3)
AMM 78-31-00-710-042 Operational Test of the Thrust Reverser System
AMM 78-31-19-000-001 Removal of the Blocker Door Latches
(3002KM1,3002KM2,3002KM3,3002KM4) AMM 78-31-19-400-001 Installation of the Blocker Door Latches (3002KM1,3002KM2,3002KM3,3002KM4) AMM 78-31-41-000-001 Removal of the Blocker Door Hydraulic Actuator (3001KM1,3001KM2,3001KM3, 3001KM4) AMM 78-31-41-400-001 Installation of the Blocker Door Hydraulic Actuator
(3001KM1,3001KM2,3001KM3, 3001KM4)
AMM 78-32-41-000-001 Removal of the Lower Blocker Door
AMM 78-32-41-000-002 Removal of the Upper Blocker Door
AMM 78-32-41-400-001 Installation of the Lower Blocker Door
AMM 78-32-41-400-002 Installation of the Upper Blocker Door
3. Fault Confirmation
__________________
A. Test
(1) Do a check to see if the REV indication stays amber on the upper ECAM display unit with the DMC3 switched on.
F 『 EEFF : ALL E ∞∞78-00-00∞∞∞∞∞∞∞∞∞∞Page 203
E E Feb 01/98 E E ECES
E
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：A320 Trouble Shooting Manual 排故手册 EXHAUST(5)
