曝光台 注意防骗
网曝天猫店富美金盛家居专营店坑蒙拐骗欺诈消费者
• The advisory mode is inhibited in some flight phases.
Note: If an advisory is triggered when the ECAM is in the single-display configuration, an
advisory message appears on the upper part of the E/WD, and the associated key on
ECAM control panel flashes to identify the appropriate system page.
‐ Automatic, flight phase mode
• If no other mode is engaged, the SD displays the system page related to the present flight
phase, as shown in the following diagram.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INDICATING/RECORDING
INDICATIONS ON SD
A330/A340 FLEET DSC-31-20 P 6/10
FCOM 19 AUG 10
• Phase 2 : The F/CTL page replaces the WHEEL page for 20 s, when either pilot moves his
sidestick (more than 3 ° in pitch or roll), or when the rudder pedal deflection is more than 22 °.
• The APU page appears, when the APU MASTER switch is ON. It disappears when APU RPM
has been above 95 % for 10 s, or when the APU MASTER switch is switched OFF.
• The ENGINE page appears at the beginning of the start sequence, or when a pilot selects
“CRANK”. It disappears at the end of the start sequence.
For a description of the ENGINE and AIR indications that appear, when the SD is displaying the
CRUISE page, see the relevant FCOM chapter.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INDICATING/RECORDING
INDICATIONS ON SD
A330/A340 FLEET DSC-31-20 P 7/10
FCOM 19 AUG 10
STATUS PAGE
Applicable to: ALL
The status page displays an operational summary of the aircraft status after the SD has displayed a
failure. As shown in the illustration above, the summary includes :
(1) Limitations (speed, flight level) : Blue
(2) Approach procedures : White/Red or Amber
(3) Procedures (corrections to apply for landing) : Blue
(4) Information : Green
(5) Cancelled caution : White
(6) Inoperative system : Amber
(7) Maintenance status : White
(8) Symbol displayed if data overflows the left or right area.
The pilot scrolls the display to view overflow by pressing the CLR pushbutton.
Note: The titles of the different parts of the display are white and underlined.
The STATUS page automatically appears : Once the crew has cleared all the pages corresponding
to the current failure, and during descent when the baro reference is selected or the slats are
extended.
The pilot may manually call up the status page by pressing the STS key on the ECAM control panel.
If the STATUS page holds messages other than “CANCELLED CAUTION” or the MAINTENANCE
part, the E/WD screen displays “STS” (status reminder).
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INDICATING/RECORDING
INDICATIONS ON SD
A330/A340 FLEET DSC-31-20 P 8/10
FCOM 19 AUG 10
If the STATUS page holds messages in the MAINTENANCE part at engine shutdown, the
“STS” (status reminder) flashes on the E/WD screen.
The screen only displays the MAINTENANCE portion when the aircraft is on ground, before engine
start-up, or after engine shutdown (phases 1 and 10).
PERMANENT DATA
Applicable to: MSN
(1) Temperature
The screen displays Total Air Temperature (TAT), Static Air Temperature (SAT) in green.
(2) Messages - G LOAD
The screen displays either one of the following two items, one at a time :
Load factor (G LOAD), in amber, when the value ‐ is above 1.4 g or below 0.7 g.
This display is inhibited during flight phases 1 and 2.
‐ CHECK SD, in amber, when the DMC detects a discrepancy between acquisition and
display on the DU.
(3) UTC
The screen displays Universal Time Coordinated (UTC), synchronized with the cockpit clock, in
green.
(4) GW
The screen displays the gross weight (GW) as given by the FCMC, in green. The two last digits
are dashed if accuracy is degraded. On ground, the indication is replaced by blue dashes, if no
computed data are available.
(5) GWCG
The screen displays the center of gravity, as given by the FCMC, in green. In case of an
EXCESS AFT CG warning, the indication appears in red.
A330/A340 FLIGHT CREW
OPERATING MANUAL
AIRCRAFT SYSTEMS
INDICATING/RECORDING
INDICATIONS ON SD
A330/A340 FLEET DSC-31-20 P 9/10
FCOM 19 AUG 10
PERMANENT DATA
Applicable to: ,
(1) Temperature
The screen displays Total Air Temperature (TAT), Static Air Temperature (SAT), and the
deviation from the International Standard Atmosphere (ISA). Delta ISA is displayed in STD baro
reference mode only.
(2) Messages - G LOAD
The screen displays either one of the following two items, one at a time :
中国航空网 www.aero.cn
航空翻译 www.aviation.cn
本文链接地址：
A330/A340机组操作手册 FLIGHT CREW OPERATING MANUAL FCOM 3(60)
